Search results

Does anyone out there make a better interior light cover just behind the seats on the sy that doesn't turn yellow and brittle over time? Also wondering if there is some kinda nut or something that keeps the shift knob from falling off everytime I push down on the shifter button?

Got ahold of them!

Truck is at campbell automotive and I have no room for it http://www.syty.net/forums/showthread.php?t=64879&page=3 Truck has big stuff 3/racepack dash/c5 brakes/4l80e, coilvers, full built/part filled motor etc I am looking at 25k firm any lower and i may as well start parting it out. Pm me if...

This turbo has engine dyno /chassis dyno time on and less than 200 miles mild street use. It is the turbo in http://www.syty.net/forums/showthread.php?t=64982&highlight=74mm+turbo&page=2 Turbo could have made more than 900 on the dyno as there was more boost left in it. The compresor is a 74mm...

Is the Sy/Ty Dash unique? I think one of the pegs on mine is broken and it rattles a little. Would a sonoma have a similar dash peice? (the grey peice) Any idea of years or part #'s would be appreciated.

After doing some more research on LMC truck and having the part #'s converted from sytyarchives about foglights. http://www.lmctruck.com/ICATALOG/CST/full.aspx?Page=162 Just curious if that greyed out bracket is the same bracket that the foglight mounts to which in turn mounts to the bumper...

I'm buying Mike Renz's bracket and I have a set of blazer lights, but I need everything else the adjustment screw brackets and the housing themselves. Are there any other parts required to make this work?

My stock adjuster brackets rusted out so the walmart replacement 3x5 fog lights just dangle and flicker over bumps and such. Is there any decent kit out there with adjustable brackets that wont rust out?

On the distributor cap is it supposed to read? 2xxxxxxx5 4xxcoilxx3 6xxxxxxx1 Engine fan

Truck starts up and idles decently smooth but when ever I step on it , it just pops and bucks. I checked the rotor and cap they seem to be fine. Could it be the coil then? Does anyond know the msd part # for the coil? When I try to brake boost it just bucks and I see black smoke coming out. The...

I dont have the stock pump nor do i know where the wiring is that goes to the pump. I flooded my engine and wanted to crank it and get the gas out without flooding it more. Is there something quick I can disconnect under the engine bay aside from the fuel rail?

Wow i'm going to think twice about running one on the street. Here are 3 examples of 93 octane no meth 135-140mph trapping evo's. What would it take to get our truck up to this level? Whats the max pump gas the syclone v6's Bowtie or otherwise have made...

Does anyone know what the stock hub size is for the syclone? I've put some corvette 17" c5 wheels on my truck and have noticed this "chugging" effect only when i apply 40% brake. I know it's not warped rotors as theres no vibration under HARD braking. The truck lurches goes fast goes slow goes...

Truck has had problems with cold starts for awhile now, typically what happens is 3 minutes or so after u start it the truck really stumbles for idle and sometimes dies. Today i revved it in park to warm it up faster and if i tried to go past 1.5k it would buck pop and stumble as it got warmer...

Put in a new start awhile back added a fuse to the battery and drove it for awhile let it sit for 3 weeks now as soon as i try to start it, tries to crank a few times then the jumperpack gets low and i start hearing rapid clicks and no turning over. Any idea what else might be causing the...

Does anyone know of a company that makes sfi approved 10-15 gallon tanks for methonal use with the pickups on the bottom? I'm looking for more of the plastic type cell vs a aluminum one because meth eats away at aluminum. Either that or a small 1 gal sfi approved surge tank with bottom pickups...

Saw a thread awhile back about getting rid of the brace that holds the spare tire in place and putting a fuel cell in there with additional frame bracing? Where did it go?

I've noticed rci makes their cells out of 5051 but my local supplier only carries 5052 can anyone tell me the difference between the two alloys?

They dont have any pricing on them yet but they are looking for a tester. Anyone intrested? I dont wana be paying Nolan 125$/h to be the first to test these.. :P

Anyone else notice that it takes a really long time for the seat belts to "lock" no matter how fast you jerk them? Mine probally travels 6 inches before engagement no matter how fast u jerk them... fatal in an accident..