Search results

Re: Been too long I felt guilty as soon as i wrote the word "sy-clone" The thought that one day someone could ask if it was a real Syclone, I would hate to say no So decision made i will rebuild it Dave- good to hear from you too, your right i cant give it up its an old friend

After 9 years in storage I've finally brought it back home, its been sitting outside in hot dry socal, so rust isnt a problem (other than in the gas tank) the truck was in pretty decent running condition when i parked it in 2003, but it needs alot now a full resto, paint, cladding repair, lots...

Re: SyTy old guys I joined "the list" in about 97 i think? every day I looked forward to reading through those emails I'm still around with Sy2629 haven't driven it since about 03 or 04?

Re: DaveP's 92 #331 red/gry, pure stock, F/S Yes I too will vouch for Dave and this truck I saw it in person right after it was restored and was amazed and impressed with the attention to detail and all the extra effort that was put into it to get it correct I actually have a pic of this truck...

Re: Promote the forum yeah your right poorboy its horrible what some of these trucks go thru within just a few months on ownership and then sold off some people expect S10 reliability with Ferrari performance without any maintenance even if you show them the forum or give advise, they still...

Re: Severe water spots on glass There use to be a car restoration shop next to our shop they always used toothpaste on glass for removing things like that and whatever else 30 year old glass would have Ive never tried it Connor Sy2629

Re: whats that stuff paint shops use after color sanding? Rubbing Compound They come in different cuts -Medium,Fine, etc. Use a real buffer if you can @ about 1200 rpm then use a swirl remover, Then regular wax.

When Rebuilding the transfercase what are the best parts to use are the Gm parts ok to replace with? is there a kit or do i have to get piece by piece I didnt hear anything grind or break, It just has a lot of play on the output (front) and is leaking oil from that seal. Any info or Part numbers...

(inside bed rail to bed rail) front inside width: 55 3/8" rear inside width: 54 11/16" (front inside rail to inside tailgate edge) left inside length: 71 7/8" right inside length: 71 7/8" < both measurments where taken from the shortest point as the front rail is half - round also on...

Yeah I had the same thing with my Sy straping down the motor fixed it the noise on my truck was coming from the rear drive shaft, right before it connects to the transmission/Transfer case it goes over a crossmember (where the torsion bar support is) because the motor was raising up front...

Correct, i removed the a/c long before i got the intake the batt was removed before too. Its been so long since the truck had a/c I cant remeber how much room it takes up, so i couldnt say for sure if it will fit with a/c.. I imagine it would though. Connor

I have it on my truck with the stock turbo goes right into the factory orange boot. My battery has been relocated,and no A/C Connor 91Sy

Thanks Brian Just cant bring myself to drill into this hood yet, Ill let you know if i give up. Hows the motor going? Connor

Are there any alternatives to the hood pins that come thru the face of the hood? Seeing as my truck was in an acciedent i dont trust the factory latch especially with a fiberglass hood, but i dont like the look of hood pins Are there any stealth ways of looking it down? Anyone made a custom...

England is not using the Euro still has its own currency-(Pounds) Connor

I was able to get a new ashtry from GM about $35 also included the metal box it slides into Connor

Someone here(not sure who)was able to get the build sheets for our trucks thru GM I got a copy of mine it says what dealer it was delivered to. Connor

Ive got a faded red crx... I better check its still there, That was lucky a few more seconds later youd be ty-less I never leave my truck where i cant see it nearly every time i take it somewhere theres someone looking at it,under it, inside it, just because there curious or never seen one...

What about the transfer case Could it somehow be sending more than the 35% to the front? BTW. My brother got 2 axles in a row from Autozone that were defective, maybe your new axles were on there way out when you got them. Connor

I have the 555r's on all four really like em except when it comes to autocrossing or canyon racing, The side walls are to soft so you get alot more swaying going on, specailly when theyre hot. Strait line and braking they are great, they also pick alot of crap up,gravel etc being so soft Connor