12.7@104

A

AXXE

Member
I went 12.7 @ 104 on T1-18 and T2-18. 1.77 and 1.79 60ft. It was very cold and traction was horrible. On T1-20 it was pulling out about 5-7 knock retard. I still have stock turbo. I was using Sunoco 94 octane. I've seen people on here running 12.4 with stock turbo. Any suggestions? I think it might be time for xylene.

<font size=-1>[ This Message was edited by: AXXE on 2002-03-23 14:01 ]</font>
 
tyndago

tyndago

New member
What kind of truck- A Syclone can go low 12's on a stock turbo..a Typhoon...probably not.

Actually I have seen someone go 12.2 on the stock turbo in a Syclone.

60 foots were low 1.7's high 1.6's...

Sean
 
A

AXXE

Member
Syclone. I know it wants more. I think I have to start adding xylene so I can run the more agressive programs. I also need to hook up better.
 
B

Buster

New member
12.7 @ 104 is the best I've heard of on pump gas, add some 116 and turn up the wick and you might see that low 12. Good Luck.

Mark L
 
RAACCR

RAACCR

Member
Dude...12.7 @ 104 is awesome for a stocker on pump gas. Very few people get that far, even with xylene. Add some octane and turn it up.
 
Falco

Falco

Donating Member
Axxe,

That's real good. Congrat. Do you have a datamaster file recording such a run? I'd be really interested in to see it. What do you use to controll boost. Stock WG?

TIA,
 
D

Dale

New member
Congrats on your pass. I bet you were happy to see that time slip! I have run the exact numbers you have on pump gas,with an octane booster(probably not providing much of anything)and 65deg. temps. I have the stock turbo with an upgraded heat exchanger. I also had the same effect you had when running the 20psi setting on the Ultimate. 5-7 deg of knock. I ran out of season to try and improve on the time. I am anxiously awaiting for the new season here in Ohio. If you don't have a Data logged run to send to those who inquired I have one. I have my 12.70 run w/ 1.76 60 ft on a Datamaster file if anyone would like to view it. crosram440@aol.com Bye Dale
 
A

AXXE

Member
I dont have Datamaster on this computer, but I may be able to send it off my laptop soon. I am using the stock turbo, acutator and WG. I am surprised how good it controls boost. It over shoots a little and brings it right down. I am looking for rims that fit and some sticky tires. I know it will go faster. It was like 25 degrees out and it was really spinning the tires. It still suprised quite a few imports.
 
You must log in or register to reply here.
Top