Maple Syrup
Canadian Bacon Breath
For sale are my 18" SSR Type-C/ RS Wheels off of my Syclone.
Forged - Very Lightweight (between 18-20 pounds If I remember correctly)
BMW Bolt Pattern - 5x120.65/ 5x4.75
18x9.5" Front wheels +50 Offset (which is 7.22" backspacing)
18x10.5 Rear wheels +48 Offset (which is 7.64" backspacing)
Wheels are straight, true, no curb damage, no more cracks, no bends.
Will Bolt Right on to a Syclone/Typhoon and clear most aftermarket big brakes.
Issues:
1. - Wheels need refinishing because one (1) of the rear wheels is currently sandblasted (raw aluminum) because it had 3 cracks. I had removed the tire, had the wheel fully sand blasted, remounted the tire to check for cracks & checked for any other issues, AT THAT POINT no other cracks were found at that time. It was checked under pressure. I then un-mounted the tire again, I had the cracks professionally fixed (welded) and thats how it sits currently.
2. - Rear wheels have been widened by Weldcraft Wheels in Michigan (they specialize in Widening, narrowing and repairing wheels - its all that they do). No issues with it, I just want interested parties to be aware because some people will be turned off by this.
Motivated to sell, Let me know if you have any questions, or want more photos.
Price is $1500 USD Or Best Offer. Can Ship At Buyers Expense.
My phone number is below and that is the best way to get ahold of me. I'm not on the forums much.
905.875.5229. Located in Burlington Ontario Canada
Forged - Very Lightweight (between 18-20 pounds If I remember correctly)
BMW Bolt Pattern - 5x120.65/ 5x4.75
18x9.5" Front wheels +50 Offset (which is 7.22" backspacing)
18x10.5 Rear wheels +48 Offset (which is 7.64" backspacing)
Wheels are straight, true, no curb damage, no more cracks, no bends.
Will Bolt Right on to a Syclone/Typhoon and clear most aftermarket big brakes.
Issues:
1. - Wheels need refinishing because one (1) of the rear wheels is currently sandblasted (raw aluminum) because it had 3 cracks. I had removed the tire, had the wheel fully sand blasted, remounted the tire to check for cracks & checked for any other issues, AT THAT POINT no other cracks were found at that time. It was checked under pressure. I then un-mounted the tire again, I had the cracks professionally fixed (welded) and thats how it sits currently.
2. - Rear wheels have been widened by Weldcraft Wheels in Michigan (they specialize in Widening, narrowing and repairing wheels - its all that they do). No issues with it, I just want interested parties to be aware because some people will be turned off by this.
Motivated to sell, Let me know if you have any questions, or want more photos.
Price is $1500 USD Or Best Offer. Can Ship At Buyers Expense.
My phone number is below and that is the best way to get ahold of me. I'm not on the forums much.
905.875.5229. Located in Burlington Ontario Canada