20 g turbo

syclone3

syclone3

Member
Re: 20 g turbo

Looks like a Hahn Racecraft for a DSM. It could have a TD06 or TD06H turbine wheel and turbine housing could be a 10-12-14 cm. Hard to say.
 
1

10wetwillys

New member
Re: 20 g turbo

syclone3 said:
Looks like a Hahn Racecraft for a DSM. It could have a TD06 or TD06H turbine wheel and turbine housing could be a 10-12-14 cm. Hard to say.
Click to expand...

OK I'm asking him about the housing size.. would this be a good fix for a ty?
direct bolt on ?
he said that he installed the exhaust manifold..
 
It's just a six

It's just a six

Super Member
Re: 20 g turbo

From the looks of it, it looks like a 20G & has a 10 CM turbine housing.

Here is my 10 CM housing. The one in the middle.







If you look closer, you can see the 10 CM housing, the scroll is more squared off as compared to the 14 & stock 8 CM housings, those are more rounded.
 
Last edited:
atkonkler

atkonkler

Is this your bush?
Re: 20 g turbo

I don't know what's up with the one tube on the forward portion ....looks like someone welded another tube facing forward on it instead of facing up.:dunno:
 
Darin

Darin

New member
Re: 20 g turbo

Before purchasing it make sure that it's at least a TD06 turbine wheel. I agree, it looks like a td05h variant from Hahn Racetraft for a DSM. That turbine wheel is much to small for 4.3L of displacement.
 
TYTILIDIE

TYTILIDIE

METH HEAD
Re: 20 g turbo

That is a 20g that was on a DSM. The outlet and oil tube are dead give aways. Let's not over look the fact it's bolted to a 4 cylinder header. I wouldn't buy simply because you're going to have to change that outlet on the compressor housing. Who want to go through all that?
 
You must log in or register to reply here.
Top