2ND attempt to sell before I try CL or E-bay

SEL777

One of 101
Got to sell some more MISC. stuff. I listed these a while back, and here's whats left and some new stuff. Selling extras to fund some more purchases.

Typhoon/Syclone parts

1. Sy Ty specific 700 R4 transmission core for you to rebuild. This has the rare Sy Ty valve body and govenor was $175 now $100 LOCAL P/U ONLY
2. SyTy factory MITSU turbo pulled at 100K - good condition $150
3. Stock Sy Ty Torque Convertor. This was in a Sy that went 12.30 in the ¼ mile. It was pulled, flushed, and capped for later use was $60 now $50
4. Aftermarket SyTy torque convertor pulled with 50K – unsure of make or stall worked great. was $80 now $65 - SALE PENDING
5. Stock Sy Ty Steering Shaft, pulled at 75K was $25 now $15
6. Sy Ty computer w/o memcal $75
7. Sy Ty Spare Tire Cover – in good used condition was $40 now $30
8. Lower IC $75
9. Typhoon specific Walbro 255 LPH fuel pump less than 5K miles. Comes with new filter $70 - SOLD
10. 50# injectors, not sure of make $120 - I pulled these out and they look to be Lucas 45# p/n 5208008
http://www.docstoc.com/docs/28087920...ector-database - SALE PENDING
11. SyTy factory injectors pulled at 100K worn o-rings, & some are missing piece near the tip. Could use a 'lil love, worked prior to removal- $40

Misc. Parts

12. 4th Gen 2002 Camaro SS factory wheels (2) 17 X 9 w/50mm back spacing – not knock offs, slight pot hole damage on each – not road rash, barely noticeable. These are still straight, and would be good for a set of extras or for your slicks. was $80 now $60. Will not split the pair. LOCAL P/U ONLY. SOLD
13. C4 Corvette rear disk brake calipers & embunkments (attaches the caliper to the rear end), but not the adapters Renz sells to mount it to our rear ends.Very clean. paid $140 now $125

Please include item number for any questions/inquiries. Prices listed do NOT include shipping or fees.

Trust my 100% feedback, I don't sell junk.

Pics of most items available, if not shown here.
 

Attachments

  • COMP1.jpg
    COMP1.jpg
    40.7 KB · Views: 0
  • IC1.jpg
    IC1.jpg
    56.5 KB · Views: 0
  • INJ 1.jpg
    INJ 1.jpg
    28.5 KB · Views: 0
Last edited:

mark 0076

New member
Re: 2ND attempt to sell before I try CL or E-bay

I will take the walbro 255 lph fuel pump shipped to 53185
thanks mark
 

neildemo

Administrator
Re: 2ND attempt to sell before I try CL or E-bay

IF you still have the injectors I will take them. Do they run? are they operational?
 

ziembic

Donating Member
Re: 2ND attempt to sell before I try CL or E-bay

If you are willing to ship the ss wheels, I would be interested.
 

cloned

New member
Re: 2ND attempt to sell before I try CL or E-bay

you remember if the aftermarket torque converter was for lock up?
 

SEL777

One of 101
Re: 2ND attempt to sell before I try CL or E-bay

you remember if the aftermarket torque converter was for lock up?

I'd guess it is...as it was in my stock Ty. Somebody knows what this is....but I don't. I have a stocker one too. That one is out of Jeremys Syclone
 

cloned

New member
Re: 2ND attempt to sell before I try CL or E-bay

Can you post a pic of the aftermarket converter?
 

SEL777

One of 101
Re: 2ND attempt to sell before I try CL or E-bay

Can you post a pic of the aftermarket converter?

It's in the first pic still in the trans on the left. It's light blue in color if that helps. I can get you a better one if needed.
 

GMCtyphoon92

=ECF= GMCtyphoon92
Re: 2ND attempt to sell before I try CL or E-bay

Interested in the Turbo, I sent you a PM. thanks
 
Last edited:

IpHoOnDyou

New member
Re: 2ND attempt to sell before I try CL or E-bay

Steve im interested in the Tourque C...... aftermarket one! The injectors and the camaro wheels, If you can hold onto them till the wrench fest that would be awesome
Thanks
Steve

Also good talkin to ya today
 

SEL777

One of 101
Re: 2ND attempt to sell before I try CL or E-bay

Steve im interested in the Tourque C...... aftermarket one! The injectors and the camaro wheels, If you can hold onto them till the wrench fest that would be awesome
Thanks
Steve

Also good talkin to ya today

Which injectors? Wheels may not be available.....but I'll let you know if I still have 'em before the wrenchfest
 
Top