thumper_302
White Lighting
Being offered for sale is a vehicle for a few elite person's who can afford the best life has to offer and enjoy it.
This 2006 Mustang, including the cost of the vehicle has invested almost $100,000. No expense was spared in the build.
The build was conducted by HPS Automotive in El Paso, TX and the car was dyno tuned by Chris at Dyno Edge in Albuquerque, NM.
Original 4.8 L bored and stroked to a 5.1 L. TDC Stage III Blower cam's locked out at TDC. Heads have been professionally ported and polished. Aftermarket fuel rails and 80# injectors and a Kenny Bell dual 75 mm throtle body. On top of this engine sits a Kenny Bell 2.8 mm Mamouth making 17 psi. Fuel is feed by GT 500 pumps and Kenny Bell boost a pump with a retunless fuel system. BBk long tube headers with cated X pipe.
Tuned with an SCT (XP120110E4D54)
Transmission is a stand alone TCI X6 6 speed, custom 1 piece driveshaft and a built 8.8 rearend with 3:90 gears.
Suspession mods: BMR K Memeber, A-Arms, Sub-Frame Connectors and rear upper/lower control arms. Also has a Steeda Watts Link. Full Ford Motorsport suspension.
Braking is done with Bear drilled and slotted brakes at all for corners.
Wheels are FR-500 with new tires.
The interior features a set of new Corbeau seats, rear seat delete, roll cage and custom Colbalt C2 guages.
I listed what I can remember, I am sure I have forgotten some things but you should have a good idea what your looking at.
This is an elite car for a few elite people who have the fund's and the ability to enjoy the best that life can offer.
Asking price is $30,000.00
Car has 35,000 mile's and only 150 miles since the build was completed.
We can provide the dyno information to serious buyer's.
If interested please contact me at 915-309-0703
To see pics go to:
http://odessa.craigslist.org/cto/3399821688.html
This 2006 Mustang, including the cost of the vehicle has invested almost $100,000. No expense was spared in the build.
The build was conducted by HPS Automotive in El Paso, TX and the car was dyno tuned by Chris at Dyno Edge in Albuquerque, NM.
Original 4.8 L bored and stroked to a 5.1 L. TDC Stage III Blower cam's locked out at TDC. Heads have been professionally ported and polished. Aftermarket fuel rails and 80# injectors and a Kenny Bell dual 75 mm throtle body. On top of this engine sits a Kenny Bell 2.8 mm Mamouth making 17 psi. Fuel is feed by GT 500 pumps and Kenny Bell boost a pump with a retunless fuel system. BBk long tube headers with cated X pipe.
Tuned with an SCT (XP120110E4D54)
Transmission is a stand alone TCI X6 6 speed, custom 1 piece driveshaft and a built 8.8 rearend with 3:90 gears.
Suspession mods: BMR K Memeber, A-Arms, Sub-Frame Connectors and rear upper/lower control arms. Also has a Steeda Watts Link. Full Ford Motorsport suspension.
Braking is done with Bear drilled and slotted brakes at all for corners.
Wheels are FR-500 with new tires.
The interior features a set of new Corbeau seats, rear seat delete, roll cage and custom Colbalt C2 guages.
I listed what I can remember, I am sure I have forgotten some things but you should have a good idea what your looking at.
This is an elite car for a few elite people who have the fund's and the ability to enjoy the best that life can offer.
Asking price is $30,000.00
Car has 35,000 mile's and only 150 miles since the build was completed.
We can provide the dyno information to serious buyer's.
If interested please contact me at 915-309-0703
To see pics go to:
http://odessa.craigslist.org/cto/3399821688.html
