Alky

[protosy]

What is the best (reasonable) location for a nozel to spray methanol on our motors with the stock intercooler in place? would it be possible/worth while/functional to have it spray between the turbo and intercooler? would it help keep the temps down on the IC helping heat soak? or would it just be a waste?

chad

 

[93 TY 2185]

This is how I did mine. Between the intercooler and the throttle body.
This picture is from Brian Greens alky install.

 

[nightdiver]

Yeah thats the right way
In case of a backfire you wont destroy your cooler

 

[Daryl H]

One needs to let the intercooler to do as much of the work as possible.
THEN let the alcohol take up the extra slack.

 

[dgoodhue]

A few years ago I read a post about Daron try different location for the nozzle, he ended putting it before the IC. I am not sure if this because he was using SMC non pregressive or if they was distribution issues, too short of a distance before our TB (spraying alky in the dead spot between the TB bores) Anyways intially I am going to put mine before the IC (I will also save my original IC from getting hole in it)

 

[SpoolingTurbo6]

hey Dgoodhue "I am going to put mine before the IC (I will also save my original IC from getting hole in it)"

I was talking with Razor on this isue, and he stated that he could supply us with self-sealing bulkhead connectors that we can put in the collar (between the TB & Intercooler). We would just need a wider collar to get the hole in there. Make Sense?