alum fabricated valve covers ( now with pics )

[CKEITH]

Re: alum fabricated valve covers ( now with pics )

just a note to make sure that all owners i owed drivers covers to have recieved them.

typhoon92 yours are on the way. :tup:

 

[4C FED]

Re: alum fabricated valve covers ( now with pics )

I got my replacement cover today. Thanks.
I'll ship the return cover by Friday.

 

[CKEITH]

Re: alum fabricated valve covers ( now with pics )

those who are recieving their covers with provisions for breathers and pcv. you will need a push in style breather w/ a 1 1/4 base. k&n part # 599-62-1490.. 15.99 from jegs. you can use any breather you desire but make sure it is a push in style and has a 1 1/4 base..... here's a link if it helps..

http://www.jegs.com/webapp/wcs/stor...irect&categoryId=13323&parentCategoryId=11355

 

[Tommyquest]

Re: alum fabricated valve covers ( now with pics )

Here's what I did with mine. 1/2" NPT bungs w/ 90 deg. barbs to a breather tank and a billet oil fill.

Jeg's
555-15253 1/2" NPT Female weld fitting @$6.99 each
135-24110 Oil fill cap - Polished $22.99

 

[CKEITH]

Re: alum fabricated valve covers ( now with pics )

looking very good. can't wait to see them installed.

 

[CKEITH]

Re: alum fabricated valve covers ( now with pics )

ttt

 

[QUICK STORM]

Re: alum fabricated valve covers ( now with pics )

how much again for the covers with the pcv hole provisions?

 

[CKEITH]

Re: alum fabricated valve covers ( now with pics )

how much again for the covers with the pcv hole provisions?

150 shipped....

 

[QUICK STORM]

Re: alum fabricated valve covers ( now with pics )

money sent, thanks

 

[Loko Latarsha]

why didn't you just call them about it?

 

[CKEITH]

Re: alum fabricated valve covers ( now with pics )

ttt

 

[HotRodV6]

Re: alum fabricated valve covers ( now with pics )

Has anybody with the new revised D/S cover gotten them installed and had some drive time on them, id like to see some install pics and now how tey seal up after some drive time.

I may be interested in a set.

 

[Syborg Twin Turbo]

Re: alum fabricated valve covers ( now with pics )

Has anybody with the new revised D/S cover gotten them installed and had some drive time on them, id like to see some install pics and now how tey seal up after some drive time.

I may be interested in a set.

pony up the money and be done with it - ya know you want them

 

[CKEITH]

Re: alum fabricated valve covers ( now with pics )

pony up the money and be done with it - ya know you want them

that's right.... if they leak more than a quart every oil change i'll buy them back. :tup:

 

[CKEITH]

Re: alum fabricated valve covers ( now with pics )

all jokes aside if they leak i will rerund your $$$$.. who do you know that makes custom parts that will make an offer like that???????

 

[Syborg Twin Turbo]

Re: alum fabricated valve covers ( now with pics )

that's right.... if they leak more than a quart every oil change i'll buy them back. :tup:

be careful i think he leaks more then a quart of oil a month

 

[QUICK STORM]

Re: alum fabricated valve covers ( now with pics )

how do these covers take paint? jst asking cuz i might wanna paint/powder coat them black to reduce the bling factor and up the sleeper factory, to almost make them stock looking. thanks.

 

[4C FED]

Re: alum fabricated valve covers ( now with pics )

Powdercoat will stick to anything metal & will be hands down more durable than what rattle cans deliver.

 

[QUICK STORM]

Re: alum fabricated valve covers ( now with pics )

do you know of anyone in norcal that does powdercoating?

 

[4C FED]

Re: alum fabricated valve covers ( now with pics )

There's a shop in Rancho Cordova that I had ceramic coat my exhaust parts.
I'm sure you could find someone closer though.

Check this out to find a shop closer to you:
http://www.customcoaters.com/html/northern_california_2.html

And a quick search turned this up: WestCoast Powdercoaters in Concord