Another run of Datamaster cables 20 available

P

PPI Typhoon

DIY Madman
Re: Another run of Datamaster cables 20 available

HotRodV6 said:
Im interested in a cable and was wondering if you have made any progress with the USB board so that i dont have to have the USB adaptor?

Thanks
Click to expand...

No....the USB is sketchy from what I've played with so far. I would rather not come out with it unless I have it working 100%, which the chips that handle the conversion all are pretty much the same......which sometimes work......and sometimes they don't. :(

I'm working on the side project heavily right now (cladding reproduction), so new board designs are put off for the time being.

If it helps, I found my Belkin USB/Serial adapter on Ebay for $7 shipped.
 
TheNeek

TheNeek

this is my serious face
Re: Another run of Datamaster cables 20 available

Dan,
I'm still in for the next batch and am still offering my help if you need it for anything regarding further revisions. I didn't see your comment on "how small do you want to go". I work at Universal Avionics System Corporation in Tucson. www.uasc.com and we place componenets that are almost invisibile to the human eye. So the answer is... as small as we can. We're always fighting for real estate on a PCB. I'm not the PCB cad guy, I'm the mechanical guy that makes all these printed circuit boards fit in a box. Still, I might be able to help out.
 
SY2455

SY2455

70's Veteran
Re: Another run of Datamaster cables if enough interest

Re: Another run of Datamaster cables if enough interest

PPI Typhoon said:
Any laptop with a 9 pin serial port will work. Otherwise you'll need a USB-Serial adatper. The belkin is the most popular. I was able to pick one up off of Ebay for about $5. I do not sell these yet. I DO currently have boards that I'm designing (on 3rd revision now) for surface mount and USB capable, but these are still months out at my rate. ;)
Click to expand...

Can you still get new laptops with a 9 pin serial port:dunno: ? Or would I be better off waiting for a USB capable board? I in no hurry.
 
P

PPI Typhoon

DIY Madman
Re: Another run of Datamaster cables if enough interest

Re: Another run of Datamaster cables if enough interest

SY2455 said:
Can you still get new laptops with a 9 pin serial port:dunno: ? Or would I be better off waiting for a USB capable board? I in no hurry.
Click to expand...

While this is true, the requirements for DM are very light, meaning that instead of going and spending $1500 on a newish laptop, you can buy one for $300, which would be older...thus having the connector.

In addition, there is someone that makes the USB version already, Craig Moates, www.moates.net I have talked to him personally before and it's a general understanding that I don't want to step on his toes, although he's seeming to branch off into more complex things, as I'm branching off into cladding reproduction. I probably will always make the cables, but only short runs here and there.

I do have another batch in the works, but if you're waiting for me to make a USB version, I'd go with Craig's setup. All of my research time is spent at the moment working on the cladding.

Thanks everyone for your interest. I have the boards in house and all the parts, now just waiting for me to assemble them. I'll announce when they are ready.
 
C

chris_e

Jackstand Hero
Re: Another run of Datamaster cables 20 available

I would love to get my hands on one of those cables when they are available. l actually went to the TTS website first when I did a search for datamaster software, had a heart attack when I saw the price, and then figured I would search the forum for some type of alternative. Man I love this forum.
 
K

KORYBONE

92 Typhoon: Bone stock
Re: Another run of Datamaster cables 20 available

Do you have these in stock? Even if you don't put me on the list for 1 with the extention. I can pay through Paypal. Just let me know.

Kory
 
juicehead9

juicehead9

93 Typhoon # 0973
Re: Another run of Datamaster cables if enough interest

Re: Another run of Datamaster cables if enough interest

Will Turbolinks adapter work with datamaster software?
 
MYYellowTY

MYYellowTY

New member
Re: Another run of Datamaster cables 20 available

Please put me down for one from the next batch.I can send payment now if needed.I am in need of it ASAP, so im hoping your motovated this weekend!!! :rotf: Thanks!!! Chris
 
O

odlsguy

Constantly Sideways
Re: Another run of Datamaster cables 20 available

Add me to the list with extension. If you have them ready I would prefer a USB style.
 
K

Khalid

New member
Re: Another run of Datamaster cables 20 available

Hi
Please count me in for one with 3' extension

Thanks in advance and let me know the details to send you the money order.

Regards,
Khalid
 
K

Khalid

New member
Re: Another run of Datamaster cables 20 available

Hi

Just a note, You can reach me faster through my alternate e-mail (khalid_1@hotmail.com).

Thanks
Khalid
 
ProStreetMike

ProStreetMike

Cruising through AZ.....
Re: Another run of Datamaster cables 20 available

I would like one... USB to Truck if you can.... Thanks!! Mike
 
ShuggsRR

ShuggsRR

Donating Member
Re: Another run of Datamaster cables 20 available

Are any more of these going to be made? Im sure there are a bunch of people who would like them... (like myself)
 
tnsyty

tnsyty

Active member
Re: Another run of Datamaster cables 20 available

Yeah, my new laptop only has USB. I hate having to carry the invertor for the old one...
 
T

TDSRacing

New member
Re: Another run of Datamaster cables 20 available

ShuggsRR said:
Are any more of these going to be made? Im sure there are a bunch of people who would like them... (like myself)
Click to expand...

Ditto this!!!
 
You must log in or register to reply here.
Top