-another-Speed Inc TT LSX Typhoon build

Re: -another-Speed Inc TT LSX Typhoon build

What oil pan did you guys use? Or should I say what pan did you start with and cut up (if necessary)?

As cool as it is, sad to see it was a Garnet truck :(
 

danimal95

Member
Re: -another-Speed Inc TT LSX Typhoon build

Can it be done with a/c?

The pic of the dryer bottle made me sad. :(
the a/c is on the truck I have to make that last line off the dryer bottle,thats why its not there

What oil pan did you guys use? Or should I say what pan did you start with and cut up (if necessary)?

As cool as it is, sad to see it was a Garnet truck :(

RPM pan and motor mounts,pan fits nice dont like that the oil filter has to be mounted remotely,and the mounts fit nice as well but would have preferred mounts that werent solid.

just curious why does it matter what color the truck is?really doing this swap most likely kept this truck on the road,and its not like it hurts value or rarity,if anything it will only increase the value and make the truck more seen at car venues and events around the nation.I understand that 40 years down the road some people may want it to be 100% original,but really its not like these trucks will ever have the value of a 1970 hemi cuda convertable so doing these swaps really wont have any negative effects on anything,I could understand if it was a 1of 1 know to exist,but its not.They arent all butchered up and if down the road the owner wanted it back to stock it could literally all be unbolted and put back to stock.
 

gobabygo

New member
Re: -another-Speed Inc TT LSX Typhoon build

how much for a set of converted manifolds ? they look so sweet!!! i would like to do mine like that.
 

danimal95

Member
Re: -another-Speed Inc TT LSX Typhoon build

how much for a set of converted manifolds ? they look so sweet!!! i would like to do mine like that.


i am going to jig them up this winter(time permitting) and then Ill be able to reproduce them as needed,cost will depend on availability of the manifolds and time taken to build
 

Smkur50

SYTY Fleet owner
Re: -another-Speed Inc TT LSX Typhoon build

If I ship you a set of manifolds, shoot me a price to make me a set like those too.
 

danimal95

Member
Re: -another-Speed Inc TT LSX Typhoon build

If and when i jig up the manifolds,I will start a new thread in the lounge forum,it wouldnt be until this winter if it happens tho,and it will depend on how busy we are at the shop also.......I may do it on the side if personally have enough time
 

Ty0279

Historically Significant
Re: -another-Speed Inc TT LSX Typhoon build

just curious why does it matter what color the truck is?really doing this swap most likely kept this truck on the road,and its not like it hurts value or rarity,if anything it will only increase the value and make the truck more seen at car venues and events around the nation.I understand that 40 years down the road some people may want it to be 100% original,but really its not like these trucks will ever have the value of a 1970 hemi cuda convertable so doing these swaps really wont have any negative effects on anything,I could understand if it was a 1of 1 know to exist,but its not.They arent all butchered up and if down the road the owner wanted it back to stock it could literally all be unbolted and put back to stock.

Well said. Thank you. :tup:
 
Re: -another-Speed Inc TT LSX Typhoon build

just curious why does it matter what color the truck is?really doing this swap most likely kept this truck on the road,and its not like it hurts value or rarity,if anything it will only increase the value and make the truck more seen at car venues and events around the nation.I understand that 40 years down the road some people may want it to be 100% original,but really its not like these trucks will ever have the value of a 1970 hemi cuda convertable so doing these swaps really wont have any negative effects on anything,I could understand if it was a 1of 1 know to exist,but its not.They arent all butchered up and if down the road the owner wanted it back to stock it could literally all be unbolted and put back to stock.

I completely disagree.

Such a small number of trucks were Garnets. How does it not hurt the value?

Unbolting it and "putting it back to stock" is term everybody uses, anybody who's looking for a correct truck can tell. My Collectors Edition TA has all the paint markings, correct bolts without wrench marks, no scratches on the firewall/inner fenders (typically indications that it was wrenched on) etc. When I look to buy a vehicle for collecting, these are things I look at. Any vehicle that has been touched to that extent is devalued substantially in my mind. I have highly modified vehicles and I have stockers, my modified cars have very little value compared to my stockers.

I do a lot of judging at car shows, there are things we look for and things we deduct points for. A completely stock, perfectly maintained (original paint a huge plus) all add to a cars value. Someday they will be highly sought after, how many trucks are already dead and gone or have over a 100k miles - a lot of them. You and I just see it differently.
 

danimal95

Member
Re: -another-Speed Inc TT LSX Typhoon build

I completely disagree.

Such a small number of trucks were Garnets. How does it not hurt the value?

Unbolting it and "putting it back to stock" is term everybody uses, anybody who's looking for a correct truck can tell. My Collectors Edition TA has all the paint markings, correct bolts without wrench marks, no scratches on the firewall/inner fenders (typically indications that it was wrenched on) etc. When I look to buy a vehicle for collecting, these are things I look at. Any vehicle that has been touched to that extent is devalued substantially in my mind. I have highly modified vehicles and I have stockers, my modified cars have very little value compared to my stockers.

I do a lot of judging at car shows, there are things we look for and things we deduct points for. A completely stock, perfectly maintained (original paint a huge plus) all add to a cars value. Someday they will be highly sought after, how many trucks are already dead and gone or have over a 100k miles - a lot of them. You and I just see it differently.


we do see it differently,its easy to judge what someone else is doing and make opinions over the internet.The fact is that this truck has already had a re-paint,is no where as clean underneath as my texas truck,and after further inspection it appears to have had the original dash swapped out(wrong color code in the glovebox).So if that is appealing to a collector that wants a 100% correct and un-touched truck our idea of a collection worthy vehicle differs tremendously.Also on the your point about "un touched bolts" that may be a possibility on a truck that has almost zero miles on it or was driven by someone that was using it as basic transportation,but anyone that is a fanatic would agree with how tempermental these trucks are that it would be almost an impossibility not to have done some serious wrenching on it at some point in its life,and really how would it be any different to restore one of these to the degree of any top show winning muscle car done today?Im sure you could duplicate all the paint markings and small details that would indicate it being an original truck.

One more point:What we are doing with these LS swaps is trying to keep the truck as close to its original feel and theory as possible:keeping the AWD,A/C,powersteering and even cruise control....so why is it that the guys that take them strip the AWD,A/C and everything else put a bow tie odd fire block lexan windows roll bar through the back glass and turn them into strip only or drag vehicles never get people posting about "how they ruined a rare truck" or "thats a shame"????comments.....

Ill take the pepsi challenge any day,drive your truck to me,swap trucks drive it to the track 65 miles away,with the air on,subs pounding to what ever music you like,run a mid 9,drive it home,then tell me which one you would rather have
 

mattw

Active member
Re: -another-Speed Inc TT LSX Typhoon build

I completely disagree.

Such a small number of trucks were Garnets. How does it not hurt the value?

Unbolting it and "putting it back to stock" is term everybody uses, anybody who's looking for a correct truck can tell. My Collectors Edition TA has all the paint markings, correct bolts without wrench marks, no scratches on the firewall/inner fenders (typically indications that it was wrenched on) etc. When I look to buy a vehicle for collecting, these are things I look at. Any vehicle that has been touched to that extent is devalued substantially in my mind. I have highly modified vehicles and I have stockers, my modified cars have very little value compared to my stockers.

I do a lot of judging at car shows, there are things we look for and things we deduct points for. A completely stock, perfectly maintained (original paint a huge plus) all add to a cars value. Someday they will be highly sought after, how many trucks are already dead and gone or have over a 100k miles - a lot of them. You and I just see it differently.

IMO all original is boring and shows that you either have a pile of money and can afford an all original vehicle or you simply had the opportunity to store a vehicle and keep it in good condition for a long period of time.. No talent required for either of these. At car shows I walk right by these types of vehicles as I have 0 interested in them.

Now a vehicle that has been highly modified, runs well, and was done correctly gets my attention and I have a good deal of respect for the person that did the work..
 

DULM

New member
Re: -another-Speed Inc TT LSX Typhoon build

we do see it differently,its easy to judge what someone else is doing and make opinions over the internet.The fact is that this truck has already had a re-paint,is no where as clean underneath as my texas truck,and after further inspection it appears to have had the original dash swapped out(wrong color code in the glovebox).So if that is appealing to a collector that wants a 100% correct and un-touched truck our idea of a collection worthy vehicle differs tremendously.Also on the your point about "un touched bolts" that may be a possibility on a truck that has almost zero miles on it or was driven by someone that was using it as basic transportation,but anyone that is a fanatic would agree with how tempermental these trucks are that it would be almost an impossibility not to have done some serious wrenching on it at some point in its life,and really how would it be any different to restore one of these to the degree of any top show winning muscle car done today?Im sure you could duplicate all the paint markings and small details that would indicate it being an original truck.

One more point:What we are doing with these LS swaps is trying to keep the truck as close to its original feel and theory as possible:keeping the AWD,A/C,powersteering and even cruise control....so why is it that the guys that take them strip the AWD,A/C and everything else put a bow tie odd fire block lexan windows roll bar through the back glass and turn them into strip only or drag vehicles never get people posting about "how they ruined a rare truck" or "thats a shame"????comments.....

Ill take the pepsi challenge any day,drive your truck to me,swap trucks drive it to the track 65 miles away,with the air on,subs pounding to what ever music you like,run a mid 9,drive it home,then tell me which one you would rather have

I'll take your challenge, as long as I don't have to give it back!
 

turboj91

New member
Re: -another-Speed Inc TT LSX Typhoon build

I completely disagree.

Such a small number of trucks were Garnets. How does it not hurt the value?

Unbolting it and "putting it back to stock" is term everybody uses, anybody who's looking for a correct truck can tell. My Collectors Edition TA has all the paint markings, correct bolts without wrench marks, no scratches on the firewall/inner fenders (typically indications that it was wrenched on) etc. When I look to buy a vehicle for collecting, these are things I look at. Any vehicle that has been touched to that extent is devalued substantially in my mind. I have highly modified vehicles and I have stockers, my modified cars have very little value compared to my stockers.

I do a lot of judging at car shows, there are things we look for and things we deduct points for. A completely stock, perfectly maintained (original paint a huge plus) all add to a cars value. Someday they will be highly sought after, how many trucks are already dead and gone or have over a 100k miles - a lot of them. You and I just see it differently.

I can see some of your points about collecting but I think you way off base here - on these trucks. But we are all entitled to our opinions.

I am curious as to what kind of vehicles you collect and which are stock and which are modded.

Have no idea how long you have been around this site but will assume that based on your judging experience, you are not a total newb. In reference to Danimal's mods to a customers truck, or his own for that matter, it's what they wanted and that is all that matters. As Danimal mentioned, it was not a Hemi Cuda convert. These trucks have not reached collector status to the point where "true collectors" are seeking a 100% virgin and are willing to pay big money for one. It's simply not at that level and never will be. It's not a Yenko, a COPO, a Tri Power 67 Vette, a true ZL1 ect. Also it's not like he "deflowered" a 100% virgin truck either.

I collect cars and I judge as well. How many cars do you see that have been preserved 100% in all respects (not even a bolt touched). Most of the big dollar cars go through a full restoration. The muscle stuff is just old. For a 100% car, it most likely needs restoration to be like day 1. The resto doesn't kill the value. A Vette is an exception to the rule. Guys will pay pretty big money for an older untouched car. A 67 tripower car with all matching numbers, with miles, with wear and tear, not missing anything and never touched will be desireable within the Vette crowd. Guys will go into a frenzy for one of those. Let's say there are 10 guys in a frenzy for this aforementioned virgin Vette. Out of those 10, how many do you think would continue to drive the car as is vs. how many would buy it because it is a perfect candidate for a full restoration.

Do you watch auction results to the point that you obtain information on whether the car is a basic virgin or a resto. I'm not talking about late model stuff, but the earlier cars. More resto's vs untouched cars from my research. The cars reputation also plays a factor here. These trucks DO NOT have the reputation of a GNX, GN or TTA. Quite the opposite as a matter of fact. These trucks have a bad rep from those that know. They are traffic light terrors, I'll give them that and so will the general opinion but that is about it.

They detonate and blow up, They eat bearings from detonation, melt pistons, loose compression. The LB4 cylinder heads suck. They don't flow on top and the cam is small. Don't expect heavy breathing on top end in stock form. It's easy to get a GN to the mid 11's and it will do it for years. Comparing apples to apples, get a GN to the mid 11's and one of these to the same. Forget about the extreme cash outlay difference between the two, but test them and see which one lasts longer. Boost launch a SyTy multiple times in a row and trash the trans within the hour. Yes, the trans has a bad rep. for durability. A Sy is small for a tall person. Your front propshaft will break if you launch enough with traction. Stuff breaks all the time. The abs sucks. The motor mounts break. The fuel pump is weak even for a stocker. The intercooler system is overtaxed when your out for continueous "spirited" driving. The ignition is weak. The intercooler lines run over hot places ect...ect...ect... You can get this stuff from someone who knows these trucks whether they own one or not. The biggest reputation stuff is the detonation, weak trans and the difficutly to tune. This stuff is simply known and kills the market value to the true collector. They simply don't have enough of a bad ass reputation to pull big money or have a market where all the collectors have to have one. Due to the bad rep. I don't see "collector" guys out searching and paying big $$ for these trucks and don't think they ever will. The hayday has passed for these trucks. I know many will disagree and I hope I am wrong. I own one of each and would like the see the value rise to meet some of my others but I am not holding my breath.

As Danimal mentioned, the customers truck he is working on now is a repaint. The virginity was lost long ago. The rare color doesn't mean much in this case (imo) vs a extremely low mileage, untouched example. I bet the owner of this truck will get it out more often and enjoy it. It will be fast and reliable. It will get attention and make a Ty known to those that have never heard of one. Maybe that will actually help the market across the board. When more and more see the potential of these trucks, their popularity will increase and hopefully so will the market value.

Back to work for now.
 

Smkur50

SYTY Fleet owner
Re: -another-Speed Inc TT LSX Typhoon build

As fast as people modify or drive these trucks, just makes the low mile original ones rarer..sounds like all you purists need to invest in a low milage original so everytime you see one "ruined" it just makes yours more valuable.
 

Daron

Active member
My perspective on the original vs modded discussion has changed much over the years. By the time these trucks might possibly be worth something I really wont care. I want to enjoy them now, and the truck in this thread would fit that bill. Love it.



Daron
 

bryan

New member
Re: -another-Speed Inc TT LSX Typhoon build

I think if the OP keeps building cars like this and documents his builds. He could be legion in the syty world. Like who remembers Jim stokes, and the trucks he built? I believe the trucks he built would have a higher value than a stocker with the same miles. Because of the syty history, it has value to me. 10-20 years from now, if i came across one of the OP's trucks and could show documentation that speed inc. Did this truck. I would pay more for it because I would remember how great of a job speed inc did on the build. He is making syty history (in my mind) as we speak. I'd pay more for a quality built car like this any day. A car judge, at a car show may or may not see it that way. But i do. I've loved these trucks since I was in high school. Graduated in 93:), I've wanted a syty, or owned a syty ever since, and will most likely have one till the day I die. For me, this truck has greater value than a low mileage stocker. But that's just me:)
 
Top