Any body know where to get this fitting

[10secTy]

Found pics of this fitting on www.TurboLS6.com. Does anybody know where to get one.

Thanks

nolan

 

[leadfoot]

Re: Any body know where to get this fitting

Which fitting? You have two there?? :squint:

The blue one looks like a -AN banjo fitting - try Earls plumbing.

No idea what the other one is ??

 

[10secTy]

Re: Any body know where to get this fitting

I can get the banjo anyware. The 16mm x 1.5 extension is what I am looking for.

Nolan


I

Which fitting? You have two there?? :squint:

The blue one looks like a -AN banjo fitting - try Earls plumbing.

No idea what the other one is ??

 

[blackty]

Re: Any body know where to get this fitting

Summit has 28 pages of an banjo fittings. Without knowing the size, hard to find. Is the silver fitting used for a remote oil filter? The block threads should give a starting point...Jim

 

[10secTy]

Re: Any body know where to get this fitting

I need the silver fitting its a 16mm 1.5 pitch. In this app its being used as a extension for the oil galleray plug on a LS block. With Mike Lee's oil pan you do not use the nomal oil feeds and returns.

Nolan

Summit has 28 pages of an banjo fittings. Without knowing the size, hard to find. Is the silver fitting used for a remote oil filter? The block threads should give a starting point...Jim

 

[LIL QIK]

Re: Any body know where to get this fitting

I need the silver fitting its a 16mm 1.5 pitch. In this app its being used as a extension for the oil galleray plug on a LS block. With Mike Lee's oil pan you do not use the nomal oil feeds and returns.

Nolan

Nolan....I could have sworn that Mike Lee was selling that fitting.....

I've also seen it on one of my other sites....will try to locate it...

Dave

 

[10secTy]

Re: Any body know where to get this fitting

I talked to Mike and he is going to make the fitting for me.:tup:

Nolan

Nolan....I could have sworn that Mike Lee was selling that fitting.....

I've also seen it on one of my other sites....will try to locate it...

Dave

 

[ghettosled]

Re: Any body know where to get this fitting

Finally made these up, and ran a few extras to have in stock. An Earls 16mm banjo fitting is to be used in conjunction with this adaptor. PN: 776-08-16M

 

[PPI Typhoon]

Re: Any body know where to get this fitting

Isn't this for that aux port down by the filter connections? Can't you use it for an oil feed for a turbo? Obviously it would need to be sized down to a -4

 

[ghettosled]

Re: Any body know where to get this fitting

on our oil pans we do not use the "normal" feed/return ports located in the oil pan rails due to the clearance issues with the front diff. This fitting is just above the pan rail and screws in as pictured above.. cost is $45.