Anybody want to share their dyno horsepower numbers?

sy445

New member
Im going to an all-wheel drive dyno soon and was curious what kind of numbers our trucks make with mild to aggresive mods.

Please specify type of dyno, horsepower made and a track time if you have one. :tup:
 
Last edited:

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
Re: Anybody want to share their dyno horsepower numbers?

500rwhp

500rwhpdynotysheet.jpg
 

92TYPHOON937

Active member
Re: Anybody want to share their dyno horsepower numbers?

i dont have one fore the ty but the dodge with the programmer all the way up put down 471 horse and 833 torque i dont have a scanner or i would post the paper i have in the truck :tup:
 

Foot Performance

Donating Member
Re: Anybody want to share their dyno horsepower numbers?

500 rwhp is very impressive what kind of e/t are you layen down with that???
 

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
Re: Anybody want to share their dyno horsepower numbers?

keeps breaking before i go to the track.
 

Anthony

New member
Re: Anybody want to share their dyno horsepower numbers?

TyDyno.jpg


This was with a stock turbo/downpipe, L35 heads and a 422 cam. Ran a 12.7 @ 107. The dyno was a very optimistic Dynojet model 248c brought in by these guys: www.dynotuneusa.com/
 

sy445

New member
Re: Anybody want to share their dyno horsepower numbers?

Do you know how much is power is lost through the viscous and front diff?
 

It's just a six

Super Member
Re: Anybody want to share their dyno horsepower numbers?

My Sy made 386 HP & 550 ft lbs of torque RWHP on a dyno pack dyno, the ones the bolt directly to your hubs.

Have not been able to go to track.
But best time before was 12.29 @ 108 MPH.
 

Tooky

Serious about performance
Re: Anybody want to share their dyno horsepower numbers?

sy445 said:
Do you know how much is power is lost through the viscous and front diff?
Maybe Nolan knows? Has any of their customers had the engine dynoed and then taken it to the track or chassis dyno?
 

ViciousV6

400HP/550FTLB
Re: Anybody want to share their dyno horsepower numbers?

My Typhoon! A2A Intercooled, Built Motor, Vortecs, GT35R, 3" Downpipe, No Cat, 3" ATR EXhaust, Big Stuff 3

HP 390 AWD HP
TQ 500 AWD TQ

Truck Ran 11.3 @ 120 MPH on 17-18lbs of boost.

Video is on Youtube of the dyno pull.

Ralph
 
Top