Anyone Elses TB To IC Boot Pop Off At WOT?

[Jimmy]

Re: Anyone Elses TB To IC Boot Pop Off At WOT?

When running higher than 16psi on any car. THIS IS THE ONLY SOLUTION!!!!:tup:

No.Do you even know what the middle bracket does.or what it looks like?

I'll clue you in:the two outside brackets hold the IC up,the middle one holds it on.It's kinda shaped like a "Z"

 

[JustinSixx]

Re: Anyone Elses TB To IC Boot Pop Off At WOT?

It's on there with the factory brackets. I don't think my waste gate is kicking in because I don't hear it making that psssh sound when I let off the accelerator. Or do our trucks not do that?

 

[randy merritt]

Re: Anyone Elses TB To IC Boot Pop Off At WOT?

It's on there with the factory brackets. I don't think my waste gate is kicking in because I don't hear it making that psssh sound when I let off the accelerator. Or do our trucks not do that?

Stock, the do not. I think you are referring to a blow off valve. Sy/TY did not come with a factory blow off valve. Wastegate operation should not make any noise. hope this helps.

 

[JustinSixx]

Re: Anyone Elses TB To IC Boot Pop Off At WOT?

I fixed the plumbing night before last when you guys told me about it with sine vacc hose and zip ties until I can get ahold of some silicone hose.
Okay thank you for clearing that up, about the waste gate!!

 

[Throws]

Re: Anyone Elses TB To IC Boot Pop Off At WOT?

I fixed the plumbing night before last when you guys told me about it with sine vacc hose and zip ties until I can get ahold of some silicone hose.
Okay thank you for clearing that up, about the waste gate!!

If you used plain old rubber vac lines (4 and 6MM) you should be ok for quite a while. The plastic and rubber vac lines, at this point, are 20 years old.

-P