Anyone running MSD with the MSD jumper harness?

[1madgumby]

Here is A link http://www.jegs.com/i/MSD/121/8876/10002/-1 I was told the the white wire that comes from the harness just goes to the 2 plug wire that plugs into the dist. & no were else, well the harness has it going to the 2 plug harness & somewere else in the fastory wiring harness. true of false?

Thanks.

 

[JSM]

Re: Anyone running MSD with the MSD jumper harness?

I have one, plugs right in. Ibelieve the coil only gets 1 side plugged in after. 5 minute install if that, works fine and makes cutting wires not an issue so you can go back to stock on side of road if needed.

 

[warmpancakes]

Re: Anyone running MSD with the MSD jumper harness?

I have one for the mallory box (same as MSD just 1/2 the price and doesnt break) plugs right in takes longer to hide the wires

 

[Don W.]

Re: Anyone running MSD with the MSD jumper harness?

Here's the instructions:

http://www.msdignition.com/uploadedFiles/MSDIgnitioncom/Products/Accessories/8876_instructions.pdf

BTW There are no splices inside. You can remove the cover and rearrange the wires if you want.

 

[1madgumby]

Re: Anyone running MSD with the MSD jumper harness?

I understands how it plugs in, I talked to F.A.S.T. yesterday & he said only the white wire goes to the (B) side of the 2 way plug on the dist. but it comes out as 2 one the the (B) connection on the dist. & the other side goes to the wiring harness some were.

 

[1madgumby]

Re: Anyone running MSD with the MSD jumper harness?

OK. I was messing with the plug wires while it was running & it was clearing up & breaking up, so I ordered new wires today & will be here tommrow. I HOPE THE GOD IT FIXS IT !!!!!

 

[1madgumby]

Re: Anyone running MSD with the MSD jumper harness?

Changed the plug wires today ty. is running awsome !!!