anyone tried or using these deep dish ZR1's?

T

TeeTopZ

Member
Re: anyone tried or using these deep dish ZR1's?

Really, you haven't seen A mold ZR1 replicas on any trucks here?????
 
2500avalanche

2500avalanche

Well-known member
Re: anyone tried or using these deep dish ZR1's?

No offense, but I think everyone has had or has a set of these. If you look at the picture of you truck thread, I I sure you will find about ten pages of just those. I like them, but used a lot... People run zr1 wheels all the time 315/35 17
 
The Dread Pirate Fisher

The Dread Pirate Fisher

Donating Member
Re: anyone tried or using these deep dish ZR1's?

TeeTopZ said:
Really, you haven't seen A mold ZR1 replicas on any trucks here?????
Click to expand...

ok clearly you guys havent looked close enough... these are not just the run of the mill ZR1's.. these 17x11's have a DEEP dish.. meaning a larger lip from the outter rim to the spoke... which is why i posted this.. ive seen plenty of regular ZR1's 17x9.5 and 17x11's .. these 17x11's are different... LOOK AT THE PICTURES

show me a typhoon or Syclone with these specific wheels with the larger lip..

you guys are very quick to judge and didnt read what i posted before jumping down my throat..

if i could embed a picture to compare the 2, i would
 
dgoodhue

dgoodhue

BuSTeD 4.3
Re: anyone tried or using these deep dish ZR1's?

The deep dish a-molds are known in the Corvette world as cheap knock-offs. It's a big pet peeve of my good friend with a 90' Zr-1.
 
The Dread Pirate Fisher

The Dread Pirate Fisher

Donating Member
Re: anyone tried or using these deep dish ZR1's?

dgoodhue said:
The deep dish a-molds are known in the Corvette world as cheap knock-offs. It's a big pet peeve of my good friend with a 90' Zr-1.
Click to expand...

half the world uses knock-offs.. problem is GM never made Deep-dish so not exactly a 100% knock off.. but who cares..
 
turrrbo6

turrrbo6

Member
Re: anyone tried or using these deep dish ZR1's?

This is an 11" wheel with a 315. Same one everyone on here uses.

 
The Dread Pirate Fisher

The Dread Pirate Fisher

Donating Member
Re: anyone tried or using these deep dish ZR1's?

turrrbo6 said:
This is an 11" wheel with a 315. Same one everyone on here uses.

Click to expand...

Yeah I see that, thanks for the picture, but that's not the same one I'm talking about or have in the link, the dish is deeper, hence why I can't find a picture with it. I have plenty of Camaro pics with the deeper dish but non on the syty.

Guess when I order them next month I'll post up.
Thanks for the help
 
R

red typhoon

Member
Re: anyone tried or using these deep dish ZR1's?

i think that the biggest problem in this forum, is that people hide behind a key board .and they start to give there opinion on everything, what they know. and what they think they know . the rims look great pirate i have not seen any of those here . just something to think about pirate.captain morgan was trying to help . :tup::tup: it unfortunate that we are a small community of truck and if you post something .people just get on you for the smallest thinks. .:2cents::2cents::2cents:please post picture of them when you buy them .im interested in seen how it looks
 
myML320on22s

myML320on22s

New member
Re: anyone tried or using these deep dish ZR1's?

Pirate I myself am looking at the same wheels but black with the polished lip. Haven't seen them around either. As for wheel and tire sizes lots of people here including myself (zr1 saw blades ) run the 17x9.5 and 17x11 with a 315 rear with no issues. Just make sure it's the grand sport offsets 50 and 56 offset. Where are you ordering your wheels from and at what price?
 
B

blue83z

Donating Member
Re: anyone tried or using these deep dish ZR1's?

myML320on22s said:
Pirate I myself am looking at the same wheels but black with the polished lip. Haven't seen them around either. As for wheel and tire sizes lots of people here including myself (zr1 saw blades ) run the 17x9.5 and 17x11 with a 315 rear with no issues. Just make sure it's the grand sport offsets 50 and 56 offset. Where are you ordering your wheels from and at what price?
Click to expand...

was wondering if you were going to chime in
 
myML320on22s

myML320on22s

New member
Re: anyone tried or using these deep dish ZR1's?

Haha yeah Matt searching for some black with polished lips to compliment the black and grey. Which means the saw blades will be available for sale or trade if purchase the new wheels....so let me know if you know anyone interested. Would make buying another set of wheels easier.

Pirate the look of the 315s outback IMO is just flat out bad a$$. With wheels that bolt directly up with no mods or issues what's not to like if your looking for fat tire look
 
You must log in or register to reply here.
Top