Bolt on brakes sticky?
- Thread starter Grimgrak
- Start date
Black Knight
I Glow Therefore I am
Re: Bolt on brakes sticky?
It going to depend on what size wheels you want to run. Stock for stock, as far as i'm aware there is nothing that just simply bolts on thats bigger because of the S-series spindle design. You can get the kits from CBR which 1 will allow you to run up to a 12" rotor and clear stock wheel and uses a dual piston caliper off a F-body car ( 98-02 Camaro, firebird, trans am) Or you could opt for their other kit which requires the use of 17" wheels and then you can run a 13" rotor and it will take brakes off a C5 Corvette. HTH
It going to depend on what size wheels you want to run. Stock for stock, as far as i'm aware there is nothing that just simply bolts on thats bigger because of the S-series spindle design. You can get the kits from CBR which 1 will allow you to run up to a 12" rotor and clear stock wheel and uses a dual piston caliper off a F-body car ( 98-02 Camaro, firebird, trans am) Or you could opt for their other kit which requires the use of 17" wheels and then you can run a 13" rotor and it will take brakes off a C5 Corvette. HTH
Re: Bolt on brakes sticky?
Will the CBR corvette c5 brake conversion package allow me to run these zr-1 wheels without clearance issues? (also anyone with pictures of these wheels on a syclone would greatly be appreciated)
http://cgi.ebay.com/ebaymotors/17-C...tegoryZ43957QQihZ019QQitemZ290046999642QQrdZ1
Will the CBR corvette c5 brake conversion package allow me to run these zr-1 wheels without clearance issues? (also anyone with pictures of these wheels on a syclone would greatly be appreciated)
http://cgi.ebay.com/ebaymotors/17-C...tegoryZ43957QQihZ019QQitemZ290046999642QQrdZ1
Black Knight
I Glow Therefore I am
Re: Bolt on brakes sticky?
Well something is a little mixed up, the one pictured is a C5 wheel. ZR1 were on the C4 like they were talking about but didn't picture. As long as you get the correct offset wheels and they're 17" or bigger you should be able to run the C5 brake package.
Well something is a little mixed up, the one pictured is a C5 wheel. ZR1 were on the C4 like they were talking about but didn't picture. As long as you get the correct offset wheels and they're 17" or bigger you should be able to run the C5 brake package.
cvcsmkr
Donating Member
Re: Bolt on brakes sticky?
i just did the cbr ls1 kit.
very nice setup, once you get the spindles all cut and grounded down, its a easy install.
Grimgrak said:Would be possible to make a sticky about what kind of brakes fit with minimal adjustments? I'm assuming corvette and camaro brakes work well but which years are the best compatibility wise and where are some good places to find some? Ebay doesn't have any at the moment
i just did the cbr ls1 kit.
very nice setup, once you get the spindles all cut and grounded down, its a easy install.
![Quickstop [UK]](/forums/data/avatars/m/5/5165.jpg?1570199786){kind=avatar}
Quickstop [UK]
Combating adversyty.
Re: Bolt on brakes sticky?
where do you get the CBR kit from? google says motorbikes
where do you get the CBR kit from? google says motorbikes
Flyin Ryan
hated cuz he drives fords
Re: Bolt on brakes sticky?
http://www.cbrperformance.com/
Quickstop [UK] said:where do you get the CBR kit from? google says motorbikes
http://www.cbrperformance.com/
alwayscode390
pppssssshhhhhtttttttttttt
Re: Bolt on brakes sticky?
Nice, I need rear discs ---
Nice, I need rear discs ---
