Bought a Ty and made it back home!!!!

huggles

New member
I picked up my Ty on Tuesday from Jer, got it home today and I LOVE it!


Damn 8-9 psi at sea level and the truck will go 0-60 in around 7 seconds or so at 1/4 throttle!!!! DAMN!!!!


Although, I have a couple things I have to get done

1. Sputtering above 10 psi
2. Damn loose steering, got to turn the wheel 2 inches either way to get the wheels to turn
3. Need an exhaust :p


Anyone suggest some steering parts? :)


Was great to meet Jer from the forums, for all the Canadian jokes, making fun of Poutines and Maple Syrup, he was a great host!
 

turrrbo6

Member
Re: Bought a Ty and made it back home!!!!

get a shaft from jwaller on this forum. the stock rag joint had a lot of play when new and gets worse with time.
 

RSpengler

Ghetto Fab Specialist.
Re: Bought a Ty and made it back home!!!!

Or if you have junkyards in your area you can get steering shaft from a jeep that doesnt have rag joints.
-Rob
 

crusader8

Running Ty Club
Re: Bought a Ty and made it back home!!!!

i second that request, ive heard of this mod, but never fully researched it, sounds like a good idea for most trucks
 

T-Bone

Active member
Re: Bought a Ty and made it back home!!!!

huggles said:
I picked up my Ty on Tuesday from Jer, got it home today and I LOVE it!

Enjoy your honeymoon.....often with these trucks it is shortlived :). Congrats on the purchase anyway.
 

QUICK STORM

B.A.M.F. BMW Tech
Re: Bought a Ty and made it back home!!!!

huggles said:
I picked up my Ty on Tuesday from Jer, got it home today and I LOVE it!


Damn 8-9 psi at sea level and the truck will go 0-60 in around 7 seconds or so at 1/4 throttle!!!! DAMN!!!!


Although, I have a couple things I have to get done

1. Sputtering above 10 psi
2. Damn loose steering, got to turn the wheel 2 inches either way to get the wheels to turn
3. Need an exhaust :p


Anyone suggest some steering parts? :)


Was great to meet Jer from the forums, for all the Canadian jokes, making fun of Poutines and Maple Syrup, he was a great host!

i have a borgenson steering shaft, that jwaller sells, 200takes it.
 

Ty0279

Historically Significant
Re: Bought a Ty and made it back home!!!!

huggles said:
Although, I have a couple things I have to get done

1. Sputtering above 10 psi
2. Damn loose steering, got to turn the wheel 2 inches either way to get the wheels to turn
3. Need an exhaust :p

Congrats on the new Ty.

1. Prolly ignition related
2. Lots of people love Renz's shaft :bored:
3. Go 3" stainless custom
 
Re: Bought a Ty and made it back home!!!!

Ty0279 said:
Congrats on the new Ty.

1. Prolly ignition related
2. Lots of people love Renz's shaft :bored:
3. Go 3" stainless custom

:stupid:
Check your plug wires that was the problem with mine, they were getting burned from the exaust manifolds. The little heat wrap booties and new wires fixed that problem. I hear alot of people talk about Renz's shaft, but never seen it :dunno: 3" stainless is the shiznit. :tup:
 

CAMSTY

SyTy Obsessed
Re: Bought a Ty and made it back home!!!!

Congrats!!!! Keep on top of the truck and your honeymoon phase should last quite a while!!

Where are you from again?
 

Jer

Don't taze me bro!
Re: Bought a Ty and made it back home!!!!

huggles said:
I picked up my Ty on Tuesday from Jer, got it home today and I LOVE it!


Damn 8-9 psi at sea level and the truck will go 0-60 in around 7 seconds or so at 1/4 throttle!!!! DAMN!!!!


Although, I have a couple things I have to get done

1. Sputtering above 10 psi
2. Damn loose steering, got to turn the wheel 2 inches either way to get the wheels to turn
3. Need an exhaust :p


Anyone suggest some steering parts? :)


Was great to meet Jer from the forums, for all the Canadian jokes, making fun of Poutines and Maple Syrup, he was a great host!


Yeah, that thing will rip your head off 0-60 at 24psi and WOT man. You'll be stoked.


1) Like I said, I'm 99% sure it's the plugs and/or cap/rotor. I sent a brand new set up plugs with you (didn't have a chance to change them out since it started breaking up the day before you arrived. Gap them at .027 or .028 as the weak ign system, higher boost & methanol all work to put the spark out so you need a narrow gap so it can make the jump. If that doesn't solve it, change out the cap/rotor and use the NAPA gold as it's the rebranded Conrad cap that everyone will recommend on here. Plan to change all that stuff very frequently as it's the norm for these trucks. Also, the wires are new Taylors w/heat shields on the boots so they should be fine.

2) Like I told you Tuesday, there are things you can do to tighten that up. A ZQ8 steering box and a Renz Shaft are both a really good start. spooldup on this forum normally has the ZQ8 boxes for sale. You can't get the Renz shafts anywhere but I happen to have a new one I was planning to install that I will give you first dibs on if you want it. You will also want to do the idler and pitman and I hear that MOOG is the way to go there. From what I've heard this will all help substantially.

3) What, an open downpipe that exits just below the passenger seat isn't good enough for you? :rotf: I was trying to find a nice oval tip to be able to do a side exit exhaust but you might be better off running that all the way back through 4" pipe into a 4" exhaust can. If you decided to go that route I've found a VERY nice exhaust can for my 4" exhaust on my Supra. Check out Burns racing mufflers here. They are lightweight, cheap and good quality.

It was pretty fun hanging out with you man. I wasn't sure what to expect but you ended up being a pretty good guy.... for a Canadian. :tup:
 

MikeRenz

not stock
Re: Bought a Ty and made it back home!!!!

turbotyphoon69 said:
why is it wheen i read this post all i hear is "renz's stainless steel 3" shaft"
because you'd be jealous of only 3"
 

huggles

New member
Re: Bought a Ty and made it back home!!!!

HOLY MOTHER OF ALL CREATURES GREAT AND SMALL


UPDATE!!!!!


So today I went to the NW Supra meet and showed up with my Ty, cursed my broken Supra sitting in the shop's parking lot while all the other Supra owners happily dyno well into the 600's and 700's, while mine blew up on the dyno making a pathetic 520 rwhp with twice the mods as the other cars. I felt like ass and wanted to pour gas on my Supra and light that son of a bitch on fire! I swear... seriously.... burn that POS....

...so to avoid going ballistic and lighting said POS on fire, I decided to do something positive and change my plugs. The girlfriend was wearing a low cut tank top with ample boobage, and she purposefully got greasy and dirty with me. She actually changed the passenger side plugs all by herself! woot! That was the first good thing about today. Well, second, boobage the first. One of the mechanics there checked the plugs that came out and said that it looked like the truck was running pretty rich, and that the timing on the engine was probably very conservative by the marks on the electrode. So then I got the truck all together and watched some dynos and socialized. After awhile I grew tired again of all the running Supras and decided to drop the girl off at work. On the way home I give it a few times and find that it's only putting out 10 psi. I figure it has to do with the boost controller so I didn't bother messing with it too much, I had it pushing 15 psi by the time I got her to work and that was it.


After I dropped her off, I went and filled up on 94 octane being the paranoid-of-detonation guy I am. Filled the methanol tank up full, and then proceeded to double check that the methanol was actually spraying, again. Ok, checked, it works. I get to a lonely stretch of road and slowly begin cranking up the boost using the controller. I only dared to crank it up to about 24 psi, but DAMN, did that bastard pull! Wow!!!!!!!!!!


Holy crap, Jer was right, this thing is positively SICK!!!!! Here I am, not brake-boosting it, and when I punch it from a stop the whole truck feels like it got kicked the ass and just LAUNCHES and GOES! DAMN! WOW! SHIT!!!! I have rode in a 475+/- hp AWD Talon that didn't move like this. ( and several other high HP AWD cars )


With the biggest grin on my face I decided it was in my best interest to drive home slowly, and I pulled onto one of the commuter routes in Vancouver and headed home. On the way home, I think all the planets aligned, stars crossed, and the Gods smiled upon me, and blessed me with a 96-98 GT Mustang sacrifice. Yes, it happened. On a divided part of a highway, with only 3-4 cars behind us and nobody in front and no pedestrians, I was given a red light. I nearly pissed myself with excitement. The highway goes from 3 lanes to 2, and the Mustang was in the 3rd lane, myself in the 2nd. This was destiny.


The light turned green, and time nearly came to a stop. I had been holding the brake lightly and been making 1-2 psi pressure on the gauge. The Mustang roared to life, but too little, too late. The Typhoon leaned back like Fat Joe and just jumped across the intersection. Hittjng full boost within a second or so, and by the time the Mustang was even across the intersection, the Ty was about 4-5 lengths ahead. I had barely hit the speed limit and it was all over. No contest, not even close. Of course the Mustang got behind me, and proceeded to Honda fly-by me and cut me off, but the damage was done. The Typhoon has ate the first unsuspecting Ford.


Damn.


Seriously.


Damn. This truck is everything I thought it would be, and more. I cannot believe how damn fast it is.


It's so fast it scares me a little. Especially with the sloppy steering, hehe. Damn. Damn. Damn.


Damn.
 

chelo

filthy sy
Re: Bought a Ty and made it back home!!!!

You have to tighten the steering. Does it wander from side to side on the highway? What did the supra guys think? I love it when guys dont know what a syty is. After you beat them across the intersection. It seems that they always tend to stay behind.
What plugs did you install?
 

huggles

New member
Re: Bought a Ty and made it back home!!!!

chelo said:
You have to tighten the steering. Does it wander from side to side on the highway? What did the supra guys think? I love it when guys dont know what a syty is. After you beat them across the intersection. It seems that they always tend to stay behind.
What plugs did you install?



Oh jeez, I can't remember which plugs. :(


Yeah it wanders baaaaaaadly. My girlfriend laughed because it looks like "TV Car" she says, when you see TV shows where someone is driving and they are moving the wheel side to side and the car goes straight :rotf: :rotf: :rotf:
 

MotorMouth

Member
Re: Bought a Ty and made it back home!!!!

SeattleSy#1255 said:
24 psi...

stock internals?
what chip?
MMMMMMMMMUUUUUUHHHHHHHHHHHAAAAAAAAHHHHHHAAAAAAAAAAA :)

That truck will launch at 20 psi
 
Top