Brake parts, transfer case

Reboosted

Reboosted

New member
I have a near complete dual piston front, disc brake rear setup from a bravada. It was built in late 97 so it may be a 98. The fronts are complete w-rotors, spindles, calipers, hoses, hub bearings, sensors, unbolted from control arms and tie rod ends. I also have the rear set. This includes backing plates, calipers, hoses, brackets. Must be a 3-channel abs, no rear sensors. I did not grab the rear calipers or e-brake cables, but may they be available for extra. I did not grab the e-brake cable because of how they are routed. They go outside the driver side frame rail. The rear calipers look similar in hookup to ls1 rear calipers. $575.00 shipped. If you want the rear rotors add $50.00. $25.00 for e-brake cables.

I have a transfer case from an astro van. 27 spline input shaft, way too small output shaft for tys, not sure about sys. I will gut the thing for parts but am not sure what interchanges. I havent taken it apart yet but when I turn a shaft everything else turns bind free with just a slight drag with no clunks or grinds. Lemme know what you need and we can work out a price. If you need a case half let me know soon as these may go in the aluminum recycling bin this coming weekend.
 
Loeryder

Loeryder

New member
Re: Brake parts, transfer case

Just an fyi
the 27 spline transfercase from the astro does fit the Sy.
Its a BW 1372

The Ty case is a 32 spline BW4472.
 
fivetodrive

fivetodrive

CRISPY
Re: Brake parts, transfer case

This is what I used to think. But there are 2 versions of the BW4472 one for the astrovan's with a 27spline output shaft and a 32 spline for the Bravada and Typhoon. This bit me once so I have checked many astro vans of various years and they are all 27 spline...
 
Loeryder

Loeryder

New member
Re: Brake parts, transfer case

fivetodrive said:
This is what I used to think. But there are 2 versions of the BW4472 one for the astrovan's with a 27spline output shaft and a 32 spline for the Bravada and Typhoon. This bit me once so I have checked many astro vans of various years and they are all 27 spline...
Click to expand...

So you found an xcase that has the metal tag with the BW part # 4472 on it and it had a 27 spline output shaft>?
I mean I could understand buying one off ebay that someone had yanked and mistaken its identity but there are 2 distinct part #s for a reason.

I have never seen a 4472 with a 27 spline output personally but i have only swapped 5 or 6 of them on different Sys and Tys.
 
fivetodrive

fivetodrive

CRISPY
Re: Brake parts, transfer case

Loeryder said:
So you found an xcase that has the metal tag with the BW part # 4472 on it and it had a 27 spline output shaft>?
I mean I could understand buying one off ebay that someone had yanked and mistaken its identity but there are 2 distinct part #s for a reason.

I have never seen a 4472 with a 27 spline output personally but i have only swapped 5 or 6 of them on different Sys and Tys.
Click to expand...

Yep. I thought the same thing and sold one that looked good and had the 4472 number but I never checked the output shaft. I got called back telling me that it wouldn't fit. So after that I checked at least 10 astro's and they all had the 4472 number but a 27 spline output shaft.
 
You must log in or register to reply here.
Top