Built sy/ty engine great deal

silverblaz

silverblaz

Member
LOCATED IN NIAGARA FALLS ONTARIO

Well I have decided to part out my truck. I am going to start with Selling the engine first.

I am trying to sell the engine complete with everything including; turbo/alky control, external wastegate, rails injectors computer and tune so you could drop this engine use my computer and GO. I WILL ALSO THROW IN MY FMIC SET UP.

The only thing you might need to change to fit your syty ( because my blazer is 2wd) is the oil pan and the downpipe (but both will be included in the sale)
AND IT NEEDS A NEW SET OF 60LB INJECTORS

TURBO/WASTEGATE DETAILS

PTE 60-1 TURBO WITH 3 INCH DOWN PIPE
CERAMIC COATED TURBO AND EXHAUST MANIFOLDS AND DOWN PIPE

ALKY CONTROL PROGRESSIVE WATER METHONAL INJECTION

WASTEGATE TURBONETICS EVOLUTION

ENGINE DETAILS

EVERYTHING IN THIS ENGINE LISTED BELOW HAS BEEN CRYO TREATED

4.3 L NON BALANCE SHAFT V6 BLOCK
BORED .030 OVER WITH JE PISTONS
HASTINGS RINGS
BILLET SPLAYED 4 BOLT MAIN CAPS
LINE HONED
ACL/CLEVITE BEARINGS
EAGLE H BEAM RODS
ARP ROD, MAIN, HEAD STUD, MAIN BEARIN STUDS
CRANK SHAFT CUT 10/10
DOUBLE ROLLER TIMING CHAIN
CUSTOM COMP TURBO CAM
4.3 VORTEC HEADS STAINLESS MANLEY VALVES
COMETIC GASKETS
DRILLED TO FIT TYPHOON INTAKE
PORTED AND POLISHED PORT MATCHED
STOCK VORTEC ROLLER ROCKERS
COMP LIFTERS AND PUSHRODS
MELLING HIGH VOL PUMP
CLEARANCED OIL PAN/BLOCK FOR H BEAM RODS
ARP OIL PUMP SHAFT
LOWER INTAKE PORT MATCHED AND WELDED TO FIT VORTEC HEADS
EVERYTHING IS BALANCED

This engine has about 6000km on it runs great can be herd and seen running in truck still at this point.

SOME PICTURES BELOW ARE WHEN I WAS BUILDING THE ENGINE

iphonepics090.jpg

iphonepics075.jpg

iphonepics060.jpg

iphonepics018.jpg

iphonepics006.jpg

P1012265.jpg

licenseplates2015.jpg

licenseplates2009.jpg
 
Last edited:
BeastMaster02

BeastMaster02

New member
Re: Built sy/ty engine great deal

Just my opinion if you kept it until summer of next year you could sell the whole truck together for sure, I like the set-up that's in your Blazer now wished I was done with Tech school so I could buy it. GLWS :2cents:
 
M

MIXEDBREED

New member
Re: Built sy/ty engine great deal

Do you have any info on dyno numbers of 1/4 times ect with this motor. I am looking to put a new motor/turbo setup in my wifes syclone and this seems like a great deal for a straight swap over. Worth your asking price easy if everything is still working and no hidden surprises.
 
silverblaz

silverblaz

Member
Re: Built sy/ty engine great deal

NO HIDDEN PROBLEMS I stated that it does need new 60lb injectors


As for dyno numbers the sheet is below ( only dyno in the area and the numbers always read low but still very happy with the results)

was run on 20 lbs i have the data master runs also if you want to see them

TRACK TIMES only took it 2 times with the new engine ran 12.00 flat from idle at 116.0 mph with my 18s and street tires

Image0002.jpg
 
M

MIXEDBREED

New member
Re: Built sy/ty engine great deal

silverblaz said:
NO HIDDEN PROBLEMS I stated that it does need new 60lb injectors


As for dyno numbers the sheet is below ( only dyno in the area and the numbers always read low but still very happy with the results)

was run on 20 lbs i have the data master runs also if you want to see them

TRACK TIMES only took it 2 times with the new engine ran 12.00 flat from idle at 116.0 mph with my 18s and street tires

Image0002.jpg
Click to expand...

Nice numbers. With a boost launch and drag radials it should hit well into the 11's. In a lighter syclone who knows. What were you 60 ft's on the 12.0 passes?

I will talk to the wife tonight and see what she wants to do. Also will have to fig out how much to ship the motor and extras to oklahoma city.
 
silverblaz

silverblaz

Member
Re: Built sy/ty engine great deal

You know what I can not remember... it was not great because there was no launch i will look for the old slip.


All that means is that with a good launch it will go a hell of alot faster
 
M

MIXEDBREED

New member
Re: Built sy/ty engine great deal

silverblaz said:
You know what I can not remember... it was not great because there was no launch i will look for the old slip.


All that means is that with a good launch it will go a hell of alot faster
Click to expand...

Well the wifey said i am good to buy it. So now just have to put together the money and fig out how much shipping ect so I can get a good idea of the full priced delivered to me. Do you know any good shippers that can ship complete engines?

Also if you can post any vids of the engine running and data logs ect. I will have to get in contact with you in pm's/phone to fig it all out.
 
silverblaz

silverblaz

Member
Re: Built sy/ty engine great deal

No this is not sold

engine is still for sale

i am going to be parting it out soon if there is no interest good deals to come
 
silverblaz

silverblaz

Member
Re: Built sy/ty engine great deal

Truck is still for sale.

option one is with no engine obviously as is

option two is with stock s10 brakes and suspension

option 3 part everything out and sell the shell
 
go_faster

go_faster

New member
Re: Built sy/ty engine great deal

Can you provide details on what is left? The last post referred to a list but the only one I could find was regarding the sold engine and components.
 
silverblaz

silverblaz

Member
Re: Built sy/ty engine great deal

Truck is sold

engine is sold

transmission is sold

turbo pt 60-1 with syty housing for sale

interior rear sub boxes are for sale

door panels are for sale
 
You must log in or register to reply here.
Top