Checking overdrive servo
- Thread starter waitn4
- Start date
jwaller
Evil Genius/SyTy Guru
Re: Checking overdrive servo
the 4th and 2nd gear servo are located in the case on the passengers outside near the front.
they are held in by a snap ring and can be tested by applying air from the pan rail and viewing the servo pin thru the window behind the front pump area. if you remove them I suggest you replace them with a better billet versions available from sonnax.
the 4th and 2nd gear servo are located in the case on the passengers outside near the front.
they are held in by a snap ring and can be tested by applying air from the pan rail and viewing the servo pin thru the window behind the front pump area. if you remove them I suggest you replace them with a better billet versions available from sonnax.