complete front end rebuild

[cvcsmkr]

heres all the parts i ordered:
-pst front end kit w/ idler arm & inner tie rods
-solid motor mounts and trans mount
-ssbc calipers http://cgi.ebay.com/ebaymotors/ws/e...em=300024440628
-2 torsion bar mounts from car quest
-braided stainless steel lines
-edelbrock tie sleeves
-zq8 steering box
-kyb monomax
-i also have one of the sonomaGT volvo fan kits thats going on
-variable fan control
-trying to locate the jeep steering shaft

is there anything else i should do while im in there?

can you guys take a guess at what i should expect to pay for labor?

 

[warmpancakes]

Re: complete front end rebuild

Take a look at the hubs, if you are going that far and the milage is near or over 100k Id just replace them

 

[warmpancakes]

Re: complete front end rebuild

labor at a shop? 1000 ish thats a shit load of work

 

[MrNurse]

Re: complete front end rebuild

buy yourself a keg or six, invite a few friends over two or three and be sure to take plenty of breakks to stand back drink a beer and see what you have gotten done. you should be done by the end of the fouth or fifth keg for sure.