Custom Throttle Body Plates (Potential GP)

[attackdog]

Re: Custom Throttle Body Plates (Potential GP)

MICH TY:
The Ty # is 1567. Let me know how much and when you have time to get to it. There is no hurry. Thanks again. BTW, were in Michigan are you from? I am in Toledo, Ohio. See Ya!

 

[TurboJunk]

Re: Custom Throttle Body Plates

Re: Custom Throttle Body Plates

I Want One TY#1577 let me know the bill

 

[SY480]

Re: Custom Throttle Body Plates (Potential GP)

I would like Syclone #480 when you get chance.

 

[AUSyTyIN]

Re: Custom Throttle Body Plates (Potential GP)

I have an idea for another design, but I'm not sure how it would look. Since I do have a Sy, and the intake already says that, I'm thinking that it would look wierd to have it say Syclone in two places so close together, so I was thinking about doing the Intercooled with the truck number below. Has anyone done this?

 

[CarbonFiber AWD]

Re: Custom Throttle Body Plates (Potential GP)

I have an idea for another design, but I'm not sure how it would look. Since I do have a Sy, and the intake already says that, I'm thinking that it would look wierd to have it say Syclone in two places so close together, so I was thinking about doing the Intercooled with the truck number below. Has anyone done this?

I hate to add to the design confusion too.....but if the word "Intercooled" could be of the same Font as "Syclone" and then the #........I think we'd have a winner for sure and I'd comitt for sure too !
...........Vinny :tup:

 

[AUSyTyIN]

Re: Custom Throttle Body Plates (Potential GP)

I hate to add to the design confusion too.....but if the word "Intercooled" could be of the same Font as "Syclone" and then the #........I think we'd have a winner for sure and I'd comitt for sure too !
...........Vinny :tup:

That's what I was thinking. I just thought that the intercooled was in the SyTy font anyways . I guess I haven't seen a pic of it yet.

 

[Syclone Rob]

Re: Custom Throttle Body Plates (Potential GP)

I hate to add to the design confusion too.....but if the word "Intercooled" could be of the same Font as "Syclone" and then the #........I think we'd have a winner for sure and I'd comitt for sure too !
...........Vinny :tup:

I would also commit to one also if there is one like the above made with my truck number!!

 

[AUSyTyIN]

Re: Custom Throttle Body Plates (Potential GP)

Well, that's at least three of us.

 

[MICH TY]

Re: Custom Throttle Body Plates (Potential GP)

I have an idea for another design, but I'm not sure how it would look. Since I do have a Sy, and the intake already says that, I'm thinking that it would look wierd to have it say Syclone in two places so close together, so I was thinking about doing the Intercooled with the truck number below. Has anyone done this?

I agree......I've been told that some "intercooled" T/B plates are out there, and hopefully I can get a good picture of one. I'm not sure what font the lettering is done in though.

I'll try to find a font similar to the Syclone on the intake. Or if any of you can lead me in the right direction I'd appreciate the help.

If you guys might be intrested in a stainless steel T/B plate, let me know. I will be trying out a couple different grades of stainless to see if I can find some small cutters that will work. They will have to be more expensive though. And I'm not sure how difficult it will be to polish the stainless.

Thanks for your help, and intrest. :tup: ...........STEVE

 

[AUSyTyIN]

Re: Custom Throttle Body Plates (Potential GP)

I just want mine finished to match the upper intake

 

[SonomaGTlover]

Re: Custom Throttle Body Plates (Potential GP)

I'd probably be in for on on my SY.
I also like the logo keychain... got one in SY?

 

[CarbonFiber AWD]

Re: Custom Throttle Body Plates (Potential GP)

I have NO problem finishing out the surface on mine if its easier on you. You just get the Font like the Syclone lettering and I'll handle the rest.
Also 304 Stainless is plenty good. :tup:
..................Vinny

 

[GMPartsGuy]

Re: Custom Throttle Body Plates (Potential GP)

I'm 100% in on an "intercooled" logo TB plate with truck number. Aluminum, SS, whatever. I'll end up powdercoating mine anyways. Just email me when you have the details and $ ironed out.

 

[Mephisto]

Re: Custom Throttle Body Plates (Potential GP)

I'm in for one with "intercooled and my truck number"

also... if i do recall correctly... the previous "intercooled" plates were done with more of a typhoon font than syclone. meaning, the letters were cleaned up and dont have that paintbrush look to them like the sy logo does.

 

[Maxtor]

Re: Custom Throttle Body Plates (Potential GP)

I'm 100% in on an "intercooled" logo TB plate with truck number. Aluminum, SS, whatever. I'll end up powdercoating mine anyways. Just email me when you have the details and $ ironed out.

Same for me.

 

[SonomaGTlover]

Re: Custom Throttle Body Plates (Potential GP)

A lot of you guys seem to want "INTERCOOLED"... How about doing it i the SYCONE font?

 

[JKsSyclone]

Re: Custom Throttle Body Plates (Potential GP)

That looks good Jon.

 

[CarbonFiber AWD]

Re: Custom Throttle Body Plates (Potential GP)

I'm Diggin' it too ! :tup:
.............Vinny

 

[Syclone Rob]

Re: Custom Throttle Body Plates (Potential GP)

Thats exactly what I want.... with just #0364 of coarse

 

[AUSyTyIN]

Re: Custom Throttle Body Plates (Potential GP)

I'm in for that, assuming it won't be as pixleated (sp?) as it is there.