Deceleration/ throttle response

Quickstop [UK]

Quickstop [UK]

Combating adversyty.
The truck runs ok but the major issue is the load/no load setting and the off throttle response.

It starts and idles well but if I blip the throttle, the idle climbs as it shlould but then drops way low and then takes ages to ramp up again. It eventualy stabilises.

I have to let me foot off the gas really slowly and I find myself riding the brakes in traffic to keep the load on the truck.

If I go from D to P, same thing, the truck nearly dies.

I have some TunerPro RT files if anyone wants to take a look at the issue when I put it in park.

In traffic the truck has died twice now, thankfully at slow speeds but it's getting annoying.

Any ideas?
 
dgoodhue

dgoodhue

BuSTeD 4.3
Re: Deceleration/ throttle response

I had similar issue with my code 59 tune. I just datalogged the problem and went frame by frame with the bubble on and figured out which cells in my VE table were causing the problem.
 
WyoSyclone

WyoSyclone

Active member
Re: Deceleration/ throttle response

Quickstop [UK] said:
The truck runs ok but the major issue is the load/no load setting and the off throttle response.

It starts and idles well but if I blip the throttle, the idle climbs as it shlould but then drops way low and then takes ages to ramp up again. It eventualy stabilises.

I have to let me foot off the gas really slowly and I find myself riding the brakes in traffic to keep the load on the truck.

If I go from D to P, same thing, the truck nearly dies.

I have some TunerPro RT files if anyone wants to take a look at the issue when I put it in park.

In traffic the truck has died twice now, thankfully at slow speeds but it's getting annoying.

Any ideas?
Click to expand...

I'll take a look Mark, if you want to send me your log and BIN.... rputman@bresnan.net
 
You must log in or register to reply here.
Top