Disconnected hoses

[thewumpus99]

My Typhoon came with a couple of disconnected hoses, and I can't find where they're supposed to hook up. I'm linking in two photos to make it easier.

1. Here is the first one:
http://www.speakeasy.org/~maly/typhoon_vacuum_hose.jpg

#1 is a small black hose up near the firewall that looks like a vacuum line of some sort.

2. Here is the second one:
http://www.speakeasy.org/~maly/typhoon_oil_line.jpg

#2 is a clear hose with some oil in it. It comes out of the firewall, so I assume it is supposed to hook up to my aftermarket oil gauge, which is currently flatlined. Any idea where an aftermarket oil gauge should hook up to?

Also, notice that this line has oil in it, along with some bubbles of air. Do I need to bleed this somehow before hooking it back up, or can I just plug it straight in (wherever it goes)?

Thanks!

 

[Ryda85]

Re: Disconnected hoses

#1 might be an egr vac line or the fpr line

do a search for vacuum diagram and you will see where everything should go

 

[ghettosled]

Re: Disconnected hoses

first one sounds like HVAC relaed.. probably has a 90 deg boot on the end.. controls your vents for a/c, etc.

second would be an aftermarket oil pressure gauge most likely.. as long as the sourcce where it was pulling oil is plugged then you are ok.. just have some worthless hose lying in there.