Down pipe with external wastegate

[gobabygo]

I am looking for a down pipe setup for external wastegate. I have a 70 mm Garrett

 

[JSM]

Re: Down pipe with external wastegate

If stock turbo you will be looking for a lifetime as it is not possible.

So you might specify type of turbo

 

[gobabygo]

Re: Down pipe with external wastegate

Good idea. Thanks.

 

[Syclone22]

Re: Down pipe with external wastegate

Do you think a ATR downpipe with flange will work
these were used on the GN turbo,s ..

 

[gobabygo]

Re: Down pipe with external wastegate

I don't know really. I would have to see it to tell. I like the external waste gate setup. I have better luck tuning my turbo boost.

 

[THEMADTYPH00N]

Re: Down pipe with external wastegate

Do you think a ATR downpipe with flange will work
these were used on the GN turbo,s ..

The wastegate hole is in a slightly different location and one bolt hole is different from the Syty Housing. It could me made to work with some machining.

 

[red typhoon]

Re: Down pipe with external wastegate

I have 38mm wastegate turbonetic dor sale Used less then 50 mile is was on a rpm downpipe

 

[Syclone22]

Re: Down pipe with external wastegate

The wastegate hole is in a slightly different location and one bolt hole is different from the Syty Housing. It could me made to work with some machining.

You are correct the ATR turbine flange has a different bolt pattern
compared to the RPM PTE flange but it can be machined to work
i was running this with the GN turbo,s and ATR headers i did dump
the external ATR wastegate in atmosphere and block off the return tube .