Dutchty ic fitting

bshaw1979

bshaw1979

New member
Im looking for the 90 degree fitting thats barbed on the other side that goes in the lower ic. Does anyone know what size it is and where i can find them?
 
S

Sy777

Member
Re: Dutchty ic fitting

I don't remember the size but I want to say that I got my brass fittings for mine at home depot.
Take the lower with you when you go.
 
64impala

64impala

Member
Re: Dutchty ic fitting

I have a couple I bought when I did mine bc how hard it is to get. They aren't cheap. Had to go to a custom fitting shop that makes hoses etc. Hit me up to remind me to look for them. I think I have 2 or 3.
I'll send them to whoever needs em for the ride.
John
 
aasltmike

aasltmike

Active member
Re: Dutchty ic fitting

I had a hard time finding the correct thread pitch so I retapped it on my dutchty CAC. I found my fitting at a Tractor Supply Company store the next town over. IIRC, I tapped it to 1/2" NPT and the barb size is 3/4".
 
bshaw1979

bshaw1979

New member
Re: Dutchty ic fitting

Thanks for the info guys.. So do we know exactly what size it is? I'm guessing it is npt.
 
64impala

64impala

Member
Re: Dutchty ic fitting

Ok I found my fittings. I have two and one is spoken for. If anyone wants the other let me know. I'll send it for the ride. Just try to help when I can as I'm not as near the help as most of these guys on hear. I also included the card for where I got them and the part number. Hope it helps. I don't know the specs on thread size its been a year or more.
8F10EE16-orig_zps5f6754c7.jpg
 
You must log in or register to reply here.
Top