found my grinding problem!! (pics)

Mephisto

Mephisto

These trucks are cursed
Well after wondering what all the noises are coming from my front right wheel, i found the problem...
photo0001.jpg


this is the back side of my pass. front wheel, the first time i looked at it the boot was all ripped up, so i cut the rest of it off, and didnt see anything, then today i drove it around the block for the first time in 3 months, then looked and that... is this something i can fix with a very limited amount of tools, and knowledge, or should i just take it to a shop to get fixed?
 
SpoolingTurbo6

SpoolingTurbo6

Donating Member
re

re

Not hard to do on your own I donr mine in an afternoon (both)


Idiot Zone will have all the tools you need to use (make sure you return them greasy :lol: ,that always makes em' happy!

Go ahead and do the ball joints <----Be prepaired to use Excessive Force
to breake them loose

Later
Tyson
 
M

MattGE

Member
After you clean up those bearings make sure that they are still very shiny. If they look dull, you need new ones.
 
Mephisto

Mephisto

These trucks are cursed
i know this is an old post, but im finally getting around to getting this shit done...

i called napa and just for fun i called the dealer... both are telling me that i have to replace the entire hub???? $489 for the part and 4 hours labor if i want them to do it.

is this accurate? or are they trying to take me for a ride?
 
You must log in or register to reply here.
Top