FS -- RPM headers

[MRKING]

These are my RPM twin turbo headers . I had big plans for them but since buying the ty , the misses says some of my extra things have to go . They only need a set of turbo collectors to run . They could be made to work for a single turbo if a crossover pipe was fabricated. These are 304 SS and were made for vortec and non angled plug heads .They are a couple years old but have been boxed since I bought them .

1300 shipped in the US .

Collectors can be had here if you cant have them made : http://www.sytyperformance.com/inde...facturer_id=0&option=com_virtuemart&Itemid=26
Heres a full set in 321 ss to see what they run new http://www.sytyperformance.com/inde...facturer_id=0&option=com_virtuemart&Itemid=26

 

[alwayscode390]

Re: FS -- RPM headers

Gorgeous, if they werent TT ... I would jump on them ---

 

[MRKING]

Re: FS -- RPM headers

Yeah I guess people dont have a hard-on for twin turbos like they used to . I really do want to keep them , but I have to make an attempt to sell them to please the wife . Shes really upset my sy isnt running and that I bought another project truck . Oh well , she get over it

 

[clone 94]

Re: FS -- RPM headers

i was planning on making a set exactly like these for my project, the thought of just buying them is tempting lol

you say they were made for non angled plug heads, why wont they work with angle plugs? these point upwards and towards the front right?

 

[MRKING]

Re: FS -- RPM headers

Yes these do point up and forward when installed . I do know they fit certain bowtie/pontiac/brodix heads , but I cant find my old emails that had which ones listed .

I'll drive to orlando and take $50 off for the shipping if you decide .

 

[Windedv6]

Re: FS -- RPM headers

Did ypou ever find out for sure what heads they are set up for?

John

 

[ghettosled]

Re: FS -- RPM headers

flanges are setup for stock or aluminum heads (no pontiacs). will need to notch header flange for coolant sender port in vortecs.

Great deal though!!!!

 

[MRKING]

Re: FS -- RPM headers

flanges are setup for stock or aluminum heads (no pontiacs). will need to notch header flange for coolant sender port in vortecs.

Great deal though!!!!

Thanks Mike , I was looking for that info .

I was going to relocate the coolant sensor when I used these on my vortecs. The way the flange runs , it cant be notched enough without cutting the drivers side flange in two . Moving it to the front spot on the lower intake would be my best guess .

There was a sale pending but the they were looking for the 1.75 inch primary version , these are 1.5 inch models .



Still for sale for another week or so, then they go back into the future build box .

 

[Sy301]

Re: FS -- RPM headers

so what other "extra's" do you have Michael? Not looking to go twin-turbo on the sy. Just seems a bit over-kill for a street truck lol.

 

[NecroWolf]

Re: FS -- RPM headers

i wish i had a way to buy these and put them in my future build box, but the army just doesn't pay that well for me

 

[MRKING]

Re: FS -- RPM headers

I'll file these somewhere between my spare rpm 60-1 turbo and the 2nd ss 3" dp w/minigate on it that I bought to cut up and make work on the drivers side .
I did/do have plans to use these if no one scoops them up on me . I just want to enjoy my current build before i go changing things again . The 1 mile I have on everything now just hasnt been enough

 

[MRKING]

Re: FS -- RPM headers

i wish i had a way to buy these and put them in my future build box, but the army just doesn't pay that well for me

Cmon , you cant sweet talk jessica into working her paypal magic

 

[Sy301]

Re: FS -- RPM headers

I'll file these somewhere between my spare rpm 60-1 turbo and the 2nd ss 3" dp w/minigate on it that I bought to cut up and make work on the drivers side .
I did/do have plans to use these if no one scoops them up on me . I just want to enjoy my current build before i go changing things again . The 1 mile I have on everything now just hasnt been enough

Yea. You need to just throw those on the TY! I still haven't figured out how "FAST" I want the SY to go yet Am lookin for some good heads but I gotta get the brakes done cause they look kinda fugly with the new wheels showing them off!

 

[NecroWolf]

Re: FS -- RPM headers

Cmon , you cant sweet talk jessica into working her paypal magic

i wish i could, but the my play budget is empty. this month was valentine's day, her bday and our anniversary. so i ended up putting new laminate flooring in the living room and buying her a 100 gallon saltwater setup to replace her 29 gal and put some fish in it. so between that and the last little stuff to put my ty back together the toy budget has been squeezed dry.

 

[MRKING]

Re: FS -- RPM headers

That sounds crazy familiar . My wifes b-day was the 2nd , our anniversary was the 9th , and then there was valentines day . Luckily the next big thing is my bday in oct , but my wife says i celebrate that all year anyway . LOL .

 

[NecroWolf]

Re: FS -- RPM headers

well for the shared pain that should be worth like a 75% or so discount

 

[MRKING]

Re: FS -- RPM headers

I wanted to refresh this sale ad , Ive come to the conclusion that if Im always getting things set up for the next round of mods , it will forever be unending . Anyone intrested can contact me when you get the time .Still the same great price ,with half the calories .