Fuel pump to sending unit connector

[SEL777]

So, I'm prepping my new tank for my 340lph pump, and noticed the wiring that came with the new pump has a much heavier gauge than the ones with my old pump. Since I'm running a bigger pump and will use the Racetronix Hot Wire kit too, I want to use the better wiring. Can someone point me to a new plastic connector (terminal?) that plugs into the sending unit from the FP?

As always, thanks for the input!

 

[Syclone#2960]

Re: Fuel pump to sending unit connector

casper electronics might have one.

http://www.casperselectronics.com/store2/index.php?cPath=67_71

 

[SEL777]

Re: Fuel pump to sending unit connector

No one else? I can't imagine that all the upgraded fuel pumps that have been installed went with the thin factory wiring harness. I have better wiring from the fuel pump and need new terminals to connect to the sending unit plug. Any help is greatly appreciated

 

[wildphil]

Re: Fuel pump to sending unit connector

Those pumps draw a lot of current. More that the factory wiring is suppose to handle.

Racetronic sells the stuff you need. I can't remember what all needs to be changed out. I have the parts but who knows when I will get in installed.

 

[SEL777]

Re: Fuel pump to sending unit connector

Those pumps draw a lot of current. More that the factory wiring is suppose to handle.

Racetronic sells the stuff you need. I can't remember what all needs to be changed out. I have the parts but who knows when I will get in installed.

I have the Racetronix kit already, but thought that was just for the outside of the tank wiring. I have not opened it yet, I guess I'll take a look.

 

[Racetronix]

Re: Fuel pump to sending unit connector

http://www.racetronix.biz/Itemdesc.asp?ic=BCWS-001&eq=&Tp=

http://www.racetronix.biz/Itemdesc.asp?ic=RCS-010&eq=&Tp=

http://www.racetronix.biz/Itemdesc.asp?ic=RCS-045&eq=&Tp=

These items may be used to upgrade the bulkhead connector, atmosphere and vapor-side wiring.

Double up on + pump wires RED+GRY
Use hanger body + BLK wire for pump -
Use violet wire for level sensor signal.

RCS-010 is atmosphere-side connector
RCS-045 is pump connector which will accept two wires per terminal.