Fuse panel diagram
- Thread starter tfink660
- Start date
Chest Rockwell
Active member
Re: Fuse panel diagram
Have you checked this link? http://www.syty.net/forums/showthread.php?t=77461
Have you checked this link? http://www.syty.net/forums/showthread.php?t=77461
Chest Rockwell
Active member
Re: Fuse panel diagram
So, you just want a detailed pic of the fuse block, with each labeled fuse?
So, you just want a detailed pic of the fuse block, with each labeled fuse?
tfink660
New member
Re: Fuse panel diagram
correct. had something melt in there and want to see what was on there. on the melted fuse thankfully only the one. May need to do some rewiring myself.
correct. had something melt in there and want to see what was on there. on the melted fuse thankfully only the one. May need to do some rewiring myself.
Chest Rockwell
Active member
Re: Fuse panel diagram
Took some quick pics during a commercial, but came out fuzzy. Will try again after the Shootout.
Took some quick pics during a commercial, but came out fuzzy. Will try again after the Shootout.
BoostedSUV
Active member
Re: Fuse panel diagram
I had a fuse melt on my fuse panel... Ended up being the fuel pump drawing too much current. I put the racetronix hot hotwire kit and stopped melting fuses/fuse box. The circuit was the left side of fuse panel 3rd up from the bottom. Just curious if yours is the same circuit.
I had a fuse melt on my fuse panel... Ended up being the fuel pump drawing too much current. I put the racetronix hot hotwire kit and stopped melting fuses/fuse box. The circuit was the left side of fuse panel 3rd up from the bottom. Just curious if yours is the same circuit.
tfink660
New member
Re: Fuse panel diagram
i dont think its the same one. cause only things that dont seem to be working is Cig lighter, power mirror adjust and dome light. melted area was one up from tail light didnt appear to have a fuse in it but the culprit was the damn fog lamp switch it stuck on and would tur off and i sen smoke noticed that wouldnt turn off soi quickly removed that damn switch and everything stopped with the melting.. Damn man so i may have to do a little rewiring. Cig lighter wont be a problem mirrors i should be able to get just gotta figure out how to rewire the domelight stuff and i should be good.
i dont think its the same one. cause only things that dont seem to be working is Cig lighter, power mirror adjust and dome light. melted area was one up from tail light didnt appear to have a fuse in it but the culprit was the damn fog lamp switch it stuck on and would tur off and i sen smoke noticed that wouldnt turn off soi quickly removed that damn switch and everything stopped with the melting.. Damn man so i may have to do a little rewiring. Cig lighter wont be a problem mirrors i should be able to get just gotta figure out how to rewire the domelight stuff and i should be good.
powercat6
Active member
Re: Fuse panel diagram
The Horn/DM fuse also controls fog lights, radio, and horn.
Edit: Rear Window Release also
The Horn/DM fuse also controls fog lights, radio, and horn.
Edit: Rear Window Release also
Chest Rockwell
Active member
Re: Fuse panel diagram
Does this help? Took it from the manual.
Does this help? Took it from the manual.
tfink660
New member
Re: Fuse panel diagram
Radio is still working fine but all that other stuff you mentioned on that fuse is not its friggin whacked out so now im gonna have to rewire to work without touching that fuse panel anyhow what is DM?
Radio is still working fine but all that other stuff you mentioned on that fuse is not its friggin whacked out so now im gonna have to rewire to work without touching that fuse panel anyhow what is DM?
powercat6
Active member
tfink660
New member
Re: Fuse panel diagram
yah number 80 its totally melted. as is the wire to 83 Any suggestion on how i can/Should rewire without having to replace entire fuse panel i have never pulled a fuse panel are there plugs on the back that i can just get a new fuse panel and run some new wire or can i jusr rewire on another circut of the panel in the empty slots on it? I Guess ill be running new hots to each of these items and fusing each into a blank spot of the fuse panel.
yah number 80 its totally melted. as is the wire to 83 Any suggestion on how i can/Should rewire without having to replace entire fuse panel i have never pulled a fuse panel are there plugs on the back that i can just get a new fuse panel and run some new wire or can i jusr rewire on another circut of the panel in the empty slots on it? I Guess ill be running new hots to each of these items and fusing each into a blank spot of the fuse panel.
Last edited:
whiteTy1214
New member
Re: Fuse panel diagram
i just had my fog lights blowing fuses also. same fuse. the fuse would blow as soon as i pushed the light switch on. it had piaa lights installed. just bought a normal replacement and seemed to fix my problem as of now. unplugged the fog lights by bumper and then everything would return to normal. so thats when i bought a new light bulb h3. thought i would ad to this thread as i fixed this yesterday!
good luck on finding the root cause.
i just had my fog lights blowing fuses also. same fuse. the fuse would blow as soon as i pushed the light switch on. it had piaa lights installed. just bought a normal replacement and seemed to fix my problem as of now. unplugged the fog lights by bumper and then everything would return to normal. so thats when i bought a new light bulb h3. thought i would ad to this thread as i fixed this yesterday!
good luck on finding the root cause.
tfink660
New member
Re: Fuse panel diagram
i just removed the wiring to the factory fog bulbs unplugged under hood Etc Gonna get Aftermarket setup that fits in there HID of course and rewired some stuff but everything back up and working perfectly and i installed an alarm and remote start as well !!! lol .. Oh well minor setbacks as much as they are annoying just glad i caught it before it melted the whole fuse panel.
i just removed the wiring to the factory fog bulbs unplugged under hood Etc Gonna get Aftermarket setup that fits in there HID of course and rewired some stuff but everything back up and working perfectly and i installed an alarm and remote start as well !!! lol .. Oh well minor setbacks as much as they are annoying just glad i caught it before it melted the whole fuse panel.