Garage Sale - Added more pictures and parts!

fivetodrive

fivetodrive

CRISPY
Need a new daily driver so the garage sale is started to help me out with a down payment...


Complete Code $59 Setup - Laptop with Datamaster, Tunerpro, Microsoft Office, starter bins (150), Moates Ostrich (160), G1 Adapter - (35), PLX wideband with NEW sensor (175) ALDL Cable - (80) ($60
0 VALUE) $SOLD

Polished PTE 60-1 Turbo - $SOLD

Sy/Ty Cluster with 48,444 miles - $175

Driver side rear corner Typhoon Cladding - $old This piece is SOLD TO YAR

Syclone Flex-A-Forms fiberglass springs - $old these things have hardly any miles...

Hydroboost units - $75 ONE GONE ONE LEFT

Great condition prop shaft - $old

Good set of aluminum brake drums - $75 Pending- waiting on check

Typhoon Upper Intake - sold

Vortec conversion lower intake - SOLD TO BEZERK

Labonte motorsports progressive alky kit - $SOLD

More later... Since syty is blocked at work. Please call 720 933 7635 or email me aaronptimm@yahoo.com

Some more I thought of:

Sy/Ty cluster with 48444 miles I was going to convert it to all LED's but I ran out of time. I will include the bases (they are the ones with push in bulbs)

New ultimate setup with NEW 50lb injectors and

3 bar map sensor - $ON EBAY$

2 sets of z-34 hood vents - $50 each set

S-10 Manual brake conversion master cylinder wth pushrod and mounting plate - $old
NOS Syclone Steering wheel - $250

2 door Upper console with compass - $75

Compass with temp sensor - $30

2 sets Typhoon Mirrors - 1 with harness $75 1 without $40


Some pictures:
PICT1423.jpg

IMG_0267.jpg

IMG_0268.jpg

DSC_0718.jpg

DSC_0005.jpg

DSC_0792.jpg
 
Last edited:
bezerk

bezerk

New member
Re: Garage Sale

Re: Garage Sale

any pics of that lower intake? would you like to have a stock one back +cash?
 
I

i8av8

Donating Member
Re: Garage Sale

Re: Garage Sale

REALLY interested in the al drums but 75+shipping might be to much for me. how much in shipping to 78745 austin, tx? thank you
 
Goshinki

Goshinki

New member
Re: Garage Sale

Re: Garage Sale

Complete Code $59 Setup - Laptop with Datamaster, Tunerpro, Microsoft Office, starter bins (150), Moates Ostrich (160), G1 Adapter - (35), PLX wideband with NEW sensor (175) ALDL Cable - (80) ($600 VALUE) $450


What else would be needed besides a 3 bar for getting my Ty tuned?
 
WyoSyclone

WyoSyclone

Active member
Re: Garage Sale

Re: Garage Sale

Goshinki said:
Complete Code $59 Setup - Laptop with Datamaster, Tunerpro, Microsoft Office, starter bins (150), Moates Ostrich (160), G1 Adapter - (35), PLX wideband with NEW sensor (175) ALDL Cable - (80) ($600 VALUE) $450


What else would be needed besides a 3 bar for getting my Ty tuned?
Click to expand...

3-bar is about it.... this is one heck of a good deal!
 
BoostedSUV

BoostedSUV

Active member
Re: Garage Sale

Re: Garage Sale

Aarron if you break up the "code59" package I may be interetsed in the Ostrich and the G1. I have everything else. That it is one hell of a package deal tho!
 
Goshinki

Goshinki

New member
Re: Garage Sale

Re: Garage Sale

I am looking to get the Complete Code $59 Setup

Could you get me the specs on the labtop?
 
Darin

Darin

New member
Re: Garage Sale

Re: Garage Sale

Specs on the turbo? Is it a Syty turbine housing or a 4 or 5 bolt discharge? Which turbine wheel?
 
fivetodrive

fivetodrive

CRISPY
Re: Garage Sale

Re: Garage Sale

i8av8 said:
REALLY interested in the al drums but 75+shipping might be to much for me. how much in shipping to 78745 austin, tx? thank you
Click to expand...

I can get them in a large flat rate box so it should be $13.95 for shipping.
 
fivetodrive

fivetodrive

CRISPY
Re: Garage Sale

Re: Garage Sale

Goshinki said:
I am looking to get the Complete Code $59 Setup

Could you get me the specs on the labtop?
Click to expand...

Pentium 3 with 512 meg ram - I think I have a 3 bar around here as well that I would include for another $50

blk00z28 said:
Whats all with these units? Or I should say, whats all needed to install it?
Click to expand...
Hydroboost - Proportioning valve and master cylinder. I will also include a coupling nut so you can make it adjustable or you could use one of tytilidie's adapters. I also have a plate that I will include but you need to grind it to fit.

Goshinki said:
Complete Code $59 Setup - Laptop with Datamaster, Tunerpro, Microsoft Office, starter bins (150), Moates Ostrich (160), G1 Adapter - (35), PLX wideband with NEW sensor (175) ALDL Cable - (80) ($600 VALUE) $450


What else would be needed besides a 3 bar for getting my Ty tuned?
Click to expand...

Dell pentium 3 with 512 meg ram - I think I have a 3 bar around here as well that I would include for another $50 so nothing but some time!

LowestForm said:
Specs on the turbo? Is it a Syty turbine housing or a 4 or 5 bolt discharge? Which turbine wheel?
Click to expand...

It is a 60-1 with a p-trim exhaust wheel with the Sy/Ty turbine housing, that bolts directly up to stock manifolds.
 
aasltmike

aasltmike

Active member
Re: Garage Sale

Re: Garage Sale

What's the word on the prop shaft? I'm relatively new to the SyTy world, but I'm assuming you're talking about the front driveshaft. I know from reading the boards that the stockers are usually one of the first things that is replaced. Is it a stocker, or an upgrade? I may be interested in it if it's an upgrade. Or, do the prop shafts differ from Sy's to Ty's?
 
fivetodrive

fivetodrive

CRISPY
Re: Garage Sale

Re: Garage Sale

aasltmike said:
What's the word on the prop shaft? I'm relatively new to the SyTy world, but I'm assuming you're talking about the front driveshaft. I know from reading the boards that the stockers are usually one of the first things that is replaced. Is it a stocker, or an upgrade? I may be interested in it if it's an upgrade. Or, do the prop shafts differ from Sy's to Ty's?
Click to expand...

It is a very low milage stocker. I attached a picture to the first post
 
You must log in or register to reply here.
Top