Glass seal strip supplier

[92Ty#1524]

I'm replacing my side glass and windshield seal strips in conjunction with a paint job this month. I was able to find the parts through the local dealer but were a bit pricy. Dealer wanted about $66 for the sides and $25 for the windshield. I found the side seals on GMpartsdirect for about half the cost but am concerned about the shipping time. LMC truck didnt know what I was talking about.

Anyone know of an aftermarket supplier for these parts?

 

[turbodog]

Thought I'd seen it in JCWhitney, but don't see it in the latest catalog. They would probably be slower than GMPD anyway.

 

[Merk]

I did mine last winter.

If you need the part #s, let me know.

IMO, GM is the way to go.

 

[92Ty#1524]

I have the GM part numbers. How quick does GMPD ship? Painted the truck this weekend and need em pretty quick.

 

[kwick6]

Send me an email with the part #'s and I can get you a price.

I can also get any of the weatherstripping if needed. I should probably stock the one for the top of the rear hatch on the ty, with that being a place water loves to get into. I'm not sure a new weatherstripping would cure that problem, but if its worn then I'd say get a new one.

There needs to be a complete write up / how-to on fixing the rear hatch area of a ty to prevent rust formation, as well as along the cladding.

 

[VermontTy]

:2cents: JCW is a good place to find floor mats and oil drain pans; for the hassle crappy seals can cause, don't scrimp; spend the extra $100 and get GM.

 

[ABLITZ]

Painted the truck this weekend and need em pretty quick.

pics? still blue?

 

[92Ty#1524]

White/metalic gunmetal gray minus roof rack.

 

[ABLITZ]

:rock:

 

[odium]

What did you do with the engine bay? Leave it blue?

 

[Syclone#1992]

We need pics.....if you repainted the truck

 

[92Ty#1524]

The engine bay is gloss black. I painted it while the motor was out and the truck was blue. Decided to leave it that way to make a nice contrast with the white exterior and the chrome in the engine bay. I'll take pics after the cladding is put on. Still have a couple of pieces on order. I'm not sure how to post em up here. Suppose I could send them to someone who does.