MeanYellowz
New member
Alright, Im trying to put back together correctly the Ty front suspension. This thing was lowered by switching the keys at the torsion bar mount upside down. Im trying to get it back together stock so that I can then just lower it a little from stock to sit decent, via the bolts. I put the stuff all together where you had to drop the lower control arm down to get the key/ bolt deal in, then jacked the control arm up to get the spindle and everything all bolted together. This netted me a truck that sat like it had an 8 inch lift in the front. You couldnt push it down at all, it was stuck up. I disassembled again, rotated the key ONE point on the torsion bar.(seems to be like 6 sided) then set the truck down and back all the way to the ground it went. No suspension at all, just down on the bumpstops, couldnt pick it up if you had to. I need some pointers on how to put this shit together if you were starting from scratch, torsion bars and all out on the ground. Nothing to mark or go off of, cuz it was all wrong to begin with. I know the basics are covered, the keys are facing the right way, bolts and all that, that i have established by referencing other vehicles...... any help???
