Help! Transmission Gurus, can you identify what is happening

skata

Donating Member
Trans2.JPG



i'm guessing those are metal peices.r
it looks like what used to be a spring, probably one of the overrun hub return springs.
i'd say your trans is starting to go, mainly the forward sprag is starting to slip possibly.
start looking for a trans.
 

SY2932

Administrator
Looks like one of your spring retainers is about to punch out. I saw the same thing (not quite as much) in the bottom of my transmission pan when I took the stocker off and bolted my deeper TCI pan back in '01. There was a lot off clutch material on the magnet too. Transmission stayed together for almost a year being "babied" before I lost all forward gears one day on the highway :-? . The shop that did my first rebuild INCORRECTLY :evil: saved all my bad parts. Sprag was torn in two, spring retainer springs were all different lengths and laid over and I stripped ALL the teeth out of my rear planetary carrier. Unfortunately, it's time to start saving for the rebuild including a NEW torque converter. The ONLY way to flush the old one is to have it CUT OPEN and cleaned throughly. Learned the hard way :(... HTH's
 

jwaller

Evil Genius/SyTy Guru
yup, you got major problems coming your way, My suggestion is to stop driving right now, before you cost yourself a lot more by continuning to drive on this.
 
Top