Help with wideband

[syclone rider]

Ok i just bought a innovate lc1 wideband gauge and controller never messed with a wideband before but im sure theres not much to it but to do it ok my question is do you remove the factory o2 sensor and put the wideband sensor in its place or do you weld the bung on and and use both?

 

[bezerk]

Re: Help with wideband

your stock ECM neeeds narrowband input. so either your new one has an narrowband output, and you can do with that, or you weld an extra bung in place for wbo2. do you want it for datalogging? or jst for reference?

 

[syclone rider]

Re: Help with wideband

your stock ECM neeeds narrowband input. so either your new one has an narrowband output, and you can do with that, or you weld an extra bung in place for wbo2. do you want it for datalogging? or jst for reference?

datalogging for sure!

 

[turrrbo6]

Re: Help with wideband

I have the same wideband. It did not work well in the stock location (high boost with alky would send it in to error mode). Ended up moving it toward the end of the downpipe....no problems so far.

 

[syclone rider]

Re: Help with wideband

I have the same wideband. It did not work well in the stock location (high boost with alky would send it in to error mode). Ended up moving it toward the end of the downpipe....no problems so far.

Thanks for answering the next question i was going to ask where the best place for it was>

 

[Big Mike]

Re: Help with wideband

I have same too with another bung welded about an inch away from orig location and mine would act up too till i installed their heat sink no problems now. If you are going to use it with tuner pro rt do not forget to program it.

 

[syclone rider]

Re: Help with wideband

I have same too with another bung welded about an inch away from orig location and mine would act up too till i installed their heat sink no problems now. If you are going to use it with tuner pro rt do not forget to program it.

And when you mean program it you mean what it tells you to do in the instructions?

 

[turrrbo6]

Re: Help with wideband

And when you mean program it you mean what it tells you to do in the instructions?

It will need a clean air calibration once installed.

 

[syclone rider]

Re: Help with wideband

So pretty much just follow the destructions lol and everything should be ok ?

 

[Big Mike]

Re: Help with wideband

Well if you are going to use it with code 59 you need pin it into ecm and program an output. Read: http://www.code59.org/index.php?option=com_fireboard&Itemid=38&func=view&id=1846&catid=22

 

[syclone rider]

Re: Help with wideband

Well if you are going to use it with code 59 you need pin it into ecm and program an output. Read: http://www.code59.org/index.php?option=com_fireboard&Itemid=38&func=view&id=1846&catid=22

thanks for your help

 

[just_a_6]

Re: Help with wideband

I would just add a second bung and run both...

Ok i just bought a innovate lc1 wideband gauge and controller never messed with a wideband before but im sure theres not much to it but to do it ok my question is do you remove the factory o2 sensor and put the wideband sensor in its place or do you weld the bung on and and use both?