if you think you know anything

[sly dvl]

Re: if you think you know anything

Some of the people here will have a bolt in HP unit that you can just bolt in. Look here, Depending on where you live. What do you mean the turbo goes to the top?

http://www.syty.net/forums/forumdisplay.php?f=46

I assume he meant he was getting full boost. But, now that I think about it, is this judging from the factory "needle"? Cause we all know how reliable they are....

 

[mcskibadee1]

Re: if you think you know anything

winds up really high and loud and the gauge shoots to the top.Really slow off teh line.whats a bolt on hp unit supposed to do?

 

[sly dvl]

Re: if you think you know anything

whats a bolt on hp unit supposed to do?

Better flow, less restriction.

 

[SY2455]

Re: if you think you know anything

winds up really high and loud and the gauge shoots to the top.Really slow off teh line.whats a bolt on hp unit supposed to do?

Being you are in LA, I would go here.

http://www.sytyperformance.com/inde...rt&page=shop.browse&category_id=183&Itemid=26

1. Is your Turbo to Intercooler hose on and clamps tight ?

2. Is your Intercooler to Throttle Body Hose on and clamps tight ?

So we are not Hijacking another post anymore you may want to start a new posting.

 

[Specialist]

Re: if you think you know anything

thanks for all the help it was the catalytic converter it runs great now and im hitting 17psi so its all good thanks alot gentlemen it only took me all day and when i was done it didn't want to start for me but my wife got in and turned it over right away so problem solved

 

[sy#2716]

Re: if you think you know anything

I hope that you have an aftermarket boost guage too determine the boost becasue the stock guage is highly inaccurate.

You probaly need to take the truck and have sytyperformance.com to look at it and tune it for you becasue if not you will be looking for a new motor soon.

 

[SY2455]

Re: if you think you know anything

thanks for all the help it was the catalytic converter it runs great now and im hitting 17psi so its all good thanks alot gentlemen it only took me all day and when i was done it didn't want to start for me but my wife got in and turned it over right away so problem solved

If you are hitting a true 17 lbs on a stock 2-bar map and chip, You will be buying a new engine before long as they are not design to go that high. You better do what sy#2716 said.