LS2 1500hp+ Syclone build
- Thread starter Fast Cars
- Start date
Fast Cars
New member
Re: LS2 1500hp+ Syclone build
Haven´t checked, yet, but I don´t think so.
But it will be no problem to tune them right, anyway.
Haven´t checked, yet, but I don´t think so.
But it will be no problem to tune them right, anyway.
syclone383
New member
Re: LS2 1500hp+ Syclone build
Yes they do. I run them also.
Yes they do. I run them also.
Fast Cars
New member
Fast Cars
New member
Re: LS2 1500hp+ Syclone build
They get automatically resized to a nice dimension by the forum.....
Only if you click on them they are big
They get automatically resized to a nice dimension by the forum.....
Only if you click on them they are big
Fast Cars
New member
Re: LS2 1500hp+ Syclone build
Just got my new CCW 2CK wheels.
11 x 18 front with 295/35/18 BFG drag radials
13 x 18 rear with 345/30/18 BFG drag radials
All powdercoated black.
I had them on the car for a short testfit, but sorry, forgot to take a picture of that.
I´ll mount them, when the body is back on the car......that will be in about a month (hopefully).
Here´s some pictures:
Just got my new CCW 2CK wheels.
11 x 18 front with 295/35/18 BFG drag radials
13 x 18 rear with 345/30/18 BFG drag radials
All powdercoated black.
I had them on the car for a short testfit, but sorry, forgot to take a picture of that.
I´ll mount them, when the body is back on the car......that will be in about a month (hopefully).
Here´s some pictures:
Last edited:
Smkur50
SYTY Fleet owner
Re: LS2 1500hp+ Syclone build
No, it loads ALL of the picture before it resizes it..all 567,000 giga terabytes of it, before it resizes it. Trust me, it takes me forever to load the whole page too. Resize the pics to like 50-200KB before you upload them to your host. Great progress but I agree with the pic size being to big.Your pics are like 2MB a piece..that is HUGE!
Love your progress, keep it up!!
No, it loads ALL of the picture before it resizes it..all 567,000 giga terabytes of it, before it resizes it. Trust me, it takes me forever to load the whole page too. Resize the pics to like 50-200KB before you upload them to your host. Great progress but I agree with the pic size being to big.Your pics are like 2MB a piece..that is HUGE!
Love your progress, keep it up!!
Fast Cars
New member
Re: LS2 1500hp+ Syclone build
I´m sorry.
It just takes a few seconds with my internet connection.
Seems I have a fast one.
Just began to resize them and upload again..........
I´m sorry.
It just takes a few seconds with my internet connection.
Seems I have a fast one.
Just began to resize them and upload again..........
Last edited:
Smkur50
SYTY Fleet owner
Re: LS2 1500hp+ Syclone build
TIP: Im sure you may already know but try not to use two connectors other then the injector connectors(cant help this) that will interchange when you hook them up. You may know better but trust me, whether it's somebody that is helping you or you eventually sell your truck, it can save a guy a ton of headaches if you make it dummy proof..basically where you cannot possibly mix up connectors when hooking them back up. I run into this ALL the time and it can happen to you too..no matter how much you think you know your truck. So much simpler and headache proof. Just a little advice.
TIP: Im sure you may already know but try not to use two connectors other then the injector connectors(cant help this) that will interchange when you hook them up. You may know better but trust me, whether it's somebody that is helping you or you eventually sell your truck, it can save a guy a ton of headaches if you make it dummy proof..basically where you cannot possibly mix up connectors when hooking them back up. I run into this ALL the time and it can happen to you too..no matter how much you think you know your truck. So much simpler and headache proof. Just a little advice.
Fast Cars
New member
Re: LS2 1500hp+ Syclone build
Thanks and you´re absolutely right in what you say.
I use the exact same connectors the LS engines have in their stock loom, though.
So no connector is the same, just the injectors.
No chance to mix something up.
Thanks and you´re absolutely right in what you say.
I use the exact same connectors the LS engines have in their stock loom, though.
So no connector is the same, just the injectors.
No chance to mix something up.
Fast Cars
New member
Re: LS2 1500hp+ Syclone build
Allready resized the pictures to ensure fast download and to have you guys enjoy looking at them instead of waiting for them to pop up
No big deal brother! :tup: I have a pretty good connection here in Afghanistan and it's heck to get a page loaded that is that big..can't wait to get back home with a blazin fast connection again. Lovin your build..a true inspiration!
Allready resized the pictures to ensure fast download and to have you guys enjoy looking at them instead of waiting for them to pop up
Andrew S
New member
Re: LS2 1500hp+ Syclone build
^ thank you, I love looking at your updates but I was 15+ mins wait time to look at the previous page. I also have very slow internet though.
Very nice looking wheels/tires, I'm curious what is the weight of them? I cannot wait to see them all mounted up as well as everything else.
^ thank you, I love looking at your updates but I was 15+ mins wait time to look at the previous page. I also have very slow internet though.
Very nice looking wheels/tires, I'm curious what is the weight of them? I cannot wait to see them all mounted up as well as everything else.
92AcademyPhooner
New member
Re: LS2 1500hp+ Syclone build
please do whatever you have to do to get those wheels/tires on there. ha It is going to look sweet!! So cool.
please do whatever you have to do to get those wheels/tires on there. ha It is going to look sweet!! So cool.
