Lunch Money Time Slip

proptop

Donating Member
Mike,
Might have ran a little better but truck was a little on the fat side not sure of a 6.40 because that would be stout for a 3950 pound street truck. We will find out what is in it hopefully on the 15th of June as that is the next time we will be going to a Sanctioned racing event wink wink if you know what I mean. I had to pay to post pictures but that is okay as I am sure there are a few members that might want some information that requires photos on our progress to this point.
Bob
 

proptop

Donating Member
JRoy,
I am also curious to see what it will run out the back door. Just hope we have enough injector in it. The other problem is the truck really needs a stand alone to really get the tune up right. Talked to Eric Marshal a few weeks back at a Buick meet in NC and he is working on a ECM for these trucks and it might be out soon. The last time we went to MIR (with the old small motor) and got a quarter mile time slip it was almost identical to yours. The big motor combination has been giving us fits and I almost went back to the one from a few years ago. These trucks are really funny when you change a few things it can be difficult to get it to settle back down. Hopefully we can put down a good lap this weekend.
Thanks,
Bob
 

proptop

Donating Member
Gents,
Lunch Money didn't make the trip and it got in trouble at about 600 feet. I have to change the fuel system around some and see what the out come is. It did however run almost identical as the time slip posted above. So with that I am not sure what to expect the next time out.
Bob
 

JRoyPDX

Syclone 569 10.84@124mph
If you're considering an ECM, just go for the Holley EFI system. Alot of support and it works phenomenally.
 

proptop

Donating Member
Gents when I can get back on my laptop I will give details on Lunch Money. In short it is a big bore long stroke bow tie build. The motor on the avatar(I think that what it is called) is my future street rod motor for an all wheel drive project that I want to build. The current motor was intended for it but I split my stock block street racing a little nitrous powered Vega a few years back. Maybe I will start a tread about the build details of Lunch Money.
 

proptop

Donating Member
Gents,
Got my laptop fixed. Pics of Lunch Money from a few years ago. Enjoy
Bob
 

Attachments

  • IMG_0108.jpg
    IMG_0108.jpg
    47.8 KB · Views: 7
  • IMG_0110.jpg
    IMG_0110.jpg
    52.3 KB · Views: 8
  • IMG_0448.jpg
    IMG_0448.jpg
    64 KB · Views: 8
  • IMG_0223.jpg
    IMG_0223.jpg
    46.5 KB · Views: 8
  • IMG_0571.jpg
    IMG_0571.jpg
    33.8 KB · Views: 8

proptop

Donating Member
Gents,
Got the new fuel system finally installed and the bed put back on the truck. I have to reset the rear suspension and make a few test hits before we go back to our local Grudge track for another crack at it. Might also be running at Cecil County Dragway on the 21th of Sept during a Buick meet.
Bob
 
S

srukimini

Guest
Что получают постоянные клиенты Шахты

Для тех, кто решил пройти регистрации, ресурс предлагает воспользоваться партнерской программой. Распространите ссылку среди знакомых и друзей и получайте прибыль от их обменов. Пройдя на <a href="https://mine-exchenge.org/" title="шахта официальный сайт">шахта официальный сайт</a> вы можете подробно ознакомиться с бонусным предложением. Оно включает в себя 10 уровней, позволяя получать до 30% с оборота обменника.

<h2>Быстрая регистрация</h2>

Для участия в партнерской программе, клиенту необходимо заполнить форму. Придумайте логин, укажите действующий электронный почтовый ящик, вбейте два раза пароль. На указанный е-мейл придет письмо с активационным кодом и другой личной информацией.

https://mine-exchenge.org/ <a href="https://mine-exchenge.org/">https://mine-exchenge.org/</a>
 
Top