Manifold DAQ

[byrdwe02]

Re: Manifold DAQ

you don't need to make a tool to get to it. Remove the 2 or 3 bolts holding the pump/resevoir in place...and you'll then have easy access to that bolt

I have removed the bolts and finally wiggled it enough to get what appears to be enough clearance to access it, but haven't tried yet. The res. was just seized onto the bracket really hard and just took a little time to free it. I thought it wasn't going to budge at first after some pretty good coaxing. I left and came back to it and that time it let go fairly easily. I am about to try and get it off, and will let you know. Thanks for the help!

-Evans

 

[Robert Lone]

Re: Manifold DAQ

bend it 90 degrees right at the end kinda like a boxed end crow's foot.

That's why I made sure to include the words "boxed end". A reg crow's foot will prolly do the damage you're thinking of...

 

[byrdwe02]

Re: Manifold DAQ

I got it guys, thanks very much for all the help!!!