I have some parts for sale. This list will keep getting added to.
The parts I have pulled out for now are the following:
Shipping to U.S. Only - Pictures on Request
I usualy EBAY everything but figured I would give first chances here. Check my feedback on ebay under username:
4degreeslower
You can buy with confidence.
----PICTURES ON REQUEST----
--------------------------------------------------------------------
My vortec conversion will be getting sold as well. The pictures of it put together are at the link below. The setup will include the spacers, lower intake, and upper intake. the upper and lower have been ported. I can also include the heads too if anyone is interested in those (they are somewhat rusty but they should clean up easily). They are ported too and flowed around 250@.600 with the stock valves. The heads do not have spring, retainers, locks or rocker studs only the valves.
(The first 5 pictures show my lower intake conversion)
http://www.nwstp.com/tech/Vortec.htm
$450.00 Shipped For Just the Upper and Lower Intakes and spacers
$550.00 Shipped with heads
-----------------------------------------------------------------------------------
- Vac lines, Engine Bracket, MSD Coil, 2-Bar Map Sensor - $50.00 Shipped
http://i122.photobucket.com/albums/o245/vlocit/VacLinesandMSDCoil001.jpg
http://i122.photobucket.com/albums/o245/vlocit/VacLinesandMSDCoil002.jpg
- New Moroso Oil Pump MOR-22101(hi pressure stock volume) - $30.00 Shipped
http://i122.photobucket.com/albums/o245/vlocit/TyPictures003.jpg
- Stock fuel rail with KB AFPR, Lucas 621037 37# Injectors and Injector Harness - $160.00 Shipped
http://i122.photobucket.com/albums/o245/vlocit/TyPictures002.jpg
- Stock Distibutor with Accell cap and Rotor in very good condition - $50.00 Shipped
http://i122.photobucket.com/albums/o245/vlocit/TyPictures009.jpg
- Stock Timing Cover in good condition - $25.00 Shipped
- Stock transmission Aluminum Dust Cover - $40.00 Shipped
- Stock Roller Lifters and Hold Downs in Very Good Condition - Make Offer
http://i122.photobucket.com/albums/o245/vlocit/TyPictures007.jpg
- Melling MPR373 Pushrods(stock length used for about 1000 miles - Make Offer
http://i122.photobucket.com/albums/o245/vlocit/TyPictures008.jpg
----PICTURES ON REQUEST----
The parts I have pulled out for now are the following:
Shipping to U.S. Only - Pictures on Request
I usualy EBAY everything but figured I would give first chances here. Check my feedback on ebay under username:
4degreeslower
You can buy with confidence.
----PICTURES ON REQUEST----
--------------------------------------------------------------------
My vortec conversion will be getting sold as well. The pictures of it put together are at the link below. The setup will include the spacers, lower intake, and upper intake. the upper and lower have been ported. I can also include the heads too if anyone is interested in those (they are somewhat rusty but they should clean up easily). They are ported too and flowed around 250@.600 with the stock valves. The heads do not have spring, retainers, locks or rocker studs only the valves.
(The first 5 pictures show my lower intake conversion)
http://www.nwstp.com/tech/Vortec.htm
$450.00 Shipped For Just the Upper and Lower Intakes and spacers
$550.00 Shipped with heads
-----------------------------------------------------------------------------------
- Vac lines, Engine Bracket, MSD Coil, 2-Bar Map Sensor - $50.00 Shipped
http://i122.photobucket.com/albums/o245/vlocit/VacLinesandMSDCoil001.jpg
http://i122.photobucket.com/albums/o245/vlocit/VacLinesandMSDCoil002.jpg
- New Moroso Oil Pump MOR-22101(hi pressure stock volume) - $30.00 Shipped
http://i122.photobucket.com/albums/o245/vlocit/TyPictures003.jpg
- Stock fuel rail with KB AFPR, Lucas 621037 37# Injectors and Injector Harness - $160.00 Shipped
http://i122.photobucket.com/albums/o245/vlocit/TyPictures002.jpg
- Stock Distibutor with Accell cap and Rotor in very good condition - $50.00 Shipped
http://i122.photobucket.com/albums/o245/vlocit/TyPictures009.jpg
- Stock Timing Cover in good condition - $25.00 Shipped
- Stock transmission Aluminum Dust Cover - $40.00 Shipped
- Stock Roller Lifters and Hold Downs in Very Good Condition - Make Offer
http://i122.photobucket.com/albums/o245/vlocit/TyPictures007.jpg
- Melling MPR373 Pushrods(stock length used for about 1000 miles - Make Offer
http://i122.photobucket.com/albums/o245/vlocit/TyPictures008.jpg
----PICTURES ON REQUEST----
Last edited: