Mitsubishi TD06H 14cm exhaust housing

[Sportmachines]

Re: Mitsubishi TD06H 14cm exhaust housing

So a batmowheel 20g with a 9 blade 10cm housing would be possible ?

Yes, that and a 20G with BMW and 14cm housing.

 

[Z SKI]

Re: Mitsubishi TD06H 14cm exhaust housing

Yes, that and a 20G with BMW and 14cm housing.

Should be wicked!!

Per our recent conversation, you need to make a 60-1 or 25g BatMo Wheel too!!! It would be a good seller since compressor covers that are machined for them are readily available and cause they're bigger

For a visual (smallest to largest)

-Stock 17c compressor wheel: Inducer 48.3mm, Exducer 68mm

-20g compressor wheel: Inducer 52.5mm, Exducer 68mm

-60-1 compressor wheel: Inducer 59mm, Exducer 76.2mm

-25g compressor wheel: Inducer 60.2mm, Exducer 78mm


And with your new exhaust housing offerings.... You/we could have a huge selection of combinations!!

See ya,

 

[Sportmachines]

Re: Mitsubishi TD06H 14cm exhaust housing

Yes, thats the plan. More combinations, readily available, bolt on and with supporting components to make it a complete package.

Thanks!

 

[Z SKI]

Re: Mitsubishi TD06H 14cm exhaust housing

Yes, thats the plan. More combinations, readily available, bolt on and with supporting components to make it a complete package.

Thanks!

Eff ya!!! 'Merica!!!!

 

[SY2455]

Re: Mitsubishi TD06H 14cm exhaust housing

Hi Paul, not wanting to Jack your post, but I will. I using my tablet because my computer is down so I don't have the link to give you.

There is a guy in Australia that makes a Ball bearings change over for the TDO6 cartridge. A search should give you results if you might be interested.