My custom DIY a2a intercooler (pics)

[epix]

Re: My custom DIY a2a intercooler (pics)

updated 1st post with materials used in this setup

 

[Deanzsyclone]

Re: My custom DIY a2a intercooler (pics)

Still no numbers?

 

[jimhrabe]

Re: My custom DIY a2a intercooler (pics)

Feel like doing mine? LOL
Seriously looking real good Looks like I'm gonna have ta go A2A now

 

[Syclone#2960]

Re: My custom DIY a2a intercooler (pics)

Pete any temp numbers you can share with us?

 

[epix]

Re: My custom DIY a2a intercooler (pics)

Pete any temp numbers you can share with us?

It's in storage until atleast April.. temps here in MI are pretty cold during the winter.
I promise when I get it out I'll have datamaster record the temps

 

[sycho]

Re: My custom DIY a2a intercooler (pics)

do you know the weight difference between the air, water intercooler?

 

[epix]

Re: My custom DIY a2a intercooler (pics)

do you know the weight difference between the air, water intercooler?

No, but I'm sure the A2A is lighter than the stock setup, especially if you are using the ATR Auxillary intercooler kit.

The core itself isn't too heavy, probably around 30lb. Someone could weigh out a stock upper IC if they have one laying around (sold mine), but I'd estimate it at under 10lb. I still have the lower intercooler I could weigh over the weekend. The shurflo pump I had probably weighed near 8lb. The ATR Aux was probably atleast 15lb. Plus the weight of all the liquid (1 gallon = 8lbs)

 

[Flyin Ryan]

Re: My custom DIY a2a intercooler (pics)

My air2air core weighed in at 12lbs from what the ups label said.. and from that and lifted up my stock lower cche while drained i'd say they are pretty close in weight.