My Syclone KICKED my a**!

[Eluding]

Over the weekend I did plugs, wires and cap/rotor. I also installed rubber hoses to replace the metal IC lines. Installed and adjustable fuel psi regulator and a Spal fan in the lower heat exchanger.
The total count of cuts on my hands number twelve with two being deep bleeders. OUCH! I really believe as PAS was assembling these trucks they ground every edge of each part to razor sharpness.

 

[jimmyz79]

The total count of cuts on my hands number twelve >

Your mods are bringing you closer to 12 seconds - IRONY???




_________________
"It'll feel alright, were gonna make your motor run"

<font size=-1>[ This Message was edited by: jimmyz79 on 2002-03-18 21:23 ]</font>

 

[Buster]

Twelve cuts that's nothing, myclone lit himself on fire last year, now that's getting your a** kicked.

 

[V6 Kompressor]

Cuts, Fire, Hell, someone broke a damn finger just taking off the differential cover... Nurse, More Painkillers Please! We have an engine Transplant to do!!!

 

[TurboManiacal]

On 2002-03-18 21:16, Billy Bob Buckin Buster wrote:
Twelve cuts that's nothing, myclone lit himself on fire last year, now that's getting your a** kicked.

Don't forget him running full speed with the hose towards his truck...ever see a dog hit the end of his leash running full speed?

 

[Eluding]

HaHa! Great replies! I'm going to replace all the heater and radiator hoses along with a new harmonic balancer and adjust the timing this weekend. Wish me luck! I guess I'll be making a trip to the emergency room. :smile:

 

[ronniejoe80]

Anyone ever replace teh pitman arm? First step is to take the service manual and throw it as far as you can. Make sure you have cold compress and tape handy when the steering gear box falls on your fingers.

 

[V6 Kompressor]

On 2002-03-19 11:38, Eluding wrote:
HaHa! Great replies! I'm going to replace all the heater and radiator hoses along with a new harmonic balancer and adjust the timing this weekend. Wish me luck! I guess I'll be making a trip to the emergency room. :smile:

Its quicker to go ahead and pay an ambulance driver to hang around the shop while you work....

 

[midnightbluS10]

Re: My Syclone KICKED my a**!

Twelve cuts that's nothing, myclone lit himself on fire last year, now that's getting your a** kicked

Don't forget him running full speed with the hose towards his truck...ever see a dog hit the end of his leash running full speed?

That would've been a sight to see

 

[jjorgensen52]

Re: My Syclone KICKED my a**!

This weekend is the first time in about 6 months I've worked on a SyTySoGT without bleeding from some part of my arms :lol:

 

[mandingo]

Re: My Syclone KICKED my a**!

LOL, that is so funny, i stopped counting my cuts after 10 or so, the worse part is half the cuts, i dont even know when i get them, but the grease does help slow down bleeding :tup:

Over the weekend I did plugs, wires and cap/rotor. I also installed rubber hoses to replace the metal IC lines. Installed and adjustable fuel psi regulator and a Spal fan in the lower heat exchanger.
The total count of cuts on my hands number twelve with two being deep bleeders. OUCH! I really believe as PAS was assembling these trucks they ground every edge of each part to razor sharpness.

 

[gjp]

Re: My Syclone KICKED my a**!

Thats nothing. I got diabetes from working on my truck. LOL