Need drive shaft for the front diff

B

Breth

New member
Hi!

I have a Typhoon since 2 Weeks.

After a few rides oin wet conditions and after i tryed to make a good launch, i saw now that the front driveshaft (between transmission and front diff) is completley missing......
The garage didn`t say anythiong about it! So i wanna have awd! Now i need a good adress where i can buy a good driveshaft, shoud be good for 500hp........
A garage here in switzerland told me that those driveshafts are really expencive around 4000$ for the stock driveshaft (incl. import to siwtzerland and shipping and everything).
But i can not belive that those stock driveshafts are that much expensive. And when i buy a new one then a performance one, who is strong enought.
Can you guys help me?


Best regards from switerland Breth
 
JSM

JSM

Active member
Re: Need drive shaft for the front diff

D&R driveshaft is $250 ish US dollars, they won't ship outside US though. Got any contacts in US to order for you and forward to you?
 
B

Breth

New member
Re: Need drive shaft for the front diff

Yeah i have a contact in the us. BUt how strong are is the shaft?
 
JSM

JSM

Active member
Re: Need drive shaft for the front diff

I run one with a twin turbo v8 typhoon, do AWD burnouts, ~600+ ft lbs or torque 500hp or so last time I ran it at track. No problems.

I doubt your v6 will hurt it.
 
B

Breth

New member
Re: Need drive shaft for the front diff

Sounds great!

Do they have also the driveshaft from the transmission to the rear diff? Do you have a link to the website?
 
JSM

JSM

Active member
Re: Need drive shaft for the front diff

$285 per my using the search button above.

D&R Driveline inc
768 Chicago Dr, Jenison MI 49428

616-667-1308
 
Richard Le

Richard Le

New member
Re: Need drive shaft for the front diff

Got the D&R front propshaft installed on the Sy. It's a beefy unit and comes very close to touching the shifter cable and slightly rubbing against the bellhousing cover. Has anyone run into clearance issue with the D&R propshaft? Also, above 35mph, I get some vibration that wasn't there with the stock propshaft. Maybe my D&R wasn't balanced before shipping?
 
You must log in or register to reply here.
Top