NEEDED! 4L80 to t-case input shaft

THEMADTYPH00N

THEMADTYPH00N

Active member
Re: NEEDED! 4L80 to t-case input shaft

danimal95 said:
willing to pay good money!!!
Click to expand...

Dan, Im not looking to try and make money off anybody. If I knew I could get another one all I would ask is for it to be replaced. But like I said it seems these are increasingly hard to get a hold of.
 
danimal95

danimal95

Member
Re: NEEDED! 4L80 to t-case input shaft

THEMADTYPHOON came through with borrowing me his so i can have it duplicated,i usually don't like to "steal" someone else s design or part by having it reverse engineered they reproduced but I feel i have given the vender in this situation every possible way to make things right by simply producing the part that was already paid for.That being said as long as we are making 1 we may make a few more and sell them to members of the community that are in the same situation as me,if anyone is interested i will keep this post updated so I can let everyone know the time frame and pricing,thanks again for all the help to everyone
 
Smkur50

Smkur50

SYTY Fleet owner
Re: NEEDED! 4L80 to t-case input shaft

Yeah, mine didn't even last 30 seconds once they knew it was up for sale, then I had two others within 5 minutes of that wanting it. Guess I didnt ask enough for it..lol.
 
Ry368

Ry368

one mile = 5280 feet
Re: NEEDED! 4L80 to t-case input shaft

In for 1 aswell! Just need the shaft and trans controller now.
 
danimal95

danimal95

Member
Re: NEEDED! 4L80 to t-case input shaft

the shaft is already at the machinist,i dont have any idea on price yet but i believe we are doing a run of 10,I will keep everyone updated on eta and price as i get the info,thanks again for all the help and suggestions on this
 
JSM

JSM

Active member
Re: NEEDED! 4L80 to t-case input shaft

I'd venture to guess, if they heat treat it to ~40-50 HRC, with splines, etc. right at $500 each cost at machine shop.
 
J

jpalmer

New member
Re: NEEDED! 4L80 to t-case input shaft

just start a group purchase thread and label it as a "possibility" gp.
 
ghettosled

ghettosled

SYTY SUPERSTORE
Re: NEEDED! 4L80 to t-case input shaft

danimal95 said:
THEMADTYPHOON came through with borrowing me his so i can have it duplicated,i usually don't like to "steal" someone else s design or part by having it reverse engineered they reproduced but I feel i have given the vender in this situation every possible way to make things right by simply producing the part that was already paid for.
Click to expand...

fwiw, no deposit or payment was ever received and there was never any eta or promise of when we would make more. I'm sorry for any miscommunication, but i can't see anywhere in our email correspondence which would have lead you to believe anything different.

For the last 2-3 years people have complained why they were so expensive, but now that they are gone, many of us (myself included) would easily pay full price for one. I'll still buy some for what i used to sell them for, only because i don't feel like spending another $15k to let them sit on the shelf for a few more years.

The only other place i know that has made them in the past quoted me $650ea with a 10 shaft minimum order and 8-12 weeks leadtime. 50% deposit upfront. Hopefully the OP comes up with something cheaper or better as i don't like seeing your unfinished projects any more then you do.
 
fivetodrive

fivetodrive

CRISPY
Re: NEEDED! 4L80 to t-case input shaft

Under 500 is the price point on these. At this price they are a "good to have" item and will sell more. At 650 they are in the "I will think about it" category...
 
Ry368

Ry368

one mile = 5280 feet
Re: NEEDED! 4L80 to t-case input shaft

ghettosled said:
fwiw, no deposit or payment was ever received and there was never any eta or promise of when we would make more. I'm sorry for any miscommunication, but i can't see anywhere in our email correspondence which would have lead you to believe anything different.

For the last 2-3 years people have complained why they were so expensive, but now that they are gone, many of us (myself included) would easily pay full price for one. I'll still buy some for what i used to sell them for, only because i don't feel like spending another $15k to let them sit on the shelf for a few more years.

The only other place i know that has made them in the past quoted me $650ea with a 10 shaft minimum order and 8-12 weeks leadtime. 50% deposit upfront. Hopefully the OP comes up with something cheaper or better as i don't like seeing your unfinished projects any more then you do.
Click to expand...
I'm in on it if you do another run! 10 guys 50% down is NO issue here.....

1. Ry368...
2.??
3.???
4.


come on guys and get this going....:tup:
 
You must log in or register to reply here.
Top