NEEDED! 4L80 to t-case input shaft

danimal95

danimal95

Member
I am in desperate need of a t-case input shaft for a 4l80 conversion,i have had 1 on order from RPM for the last 6 months and he still says that it wont be made until he gets and order for 10 or more,unfortunately I dont have the luxury to wait that long the customer wants his truck back and finished by the end of this month,any help would be great
 
JSM

JSM

Active member
Re: NEEDED! 4L80 to t-case input shaft

Not that I know of for transfer case. If there is I would be interested to know which one as I get asked all the time to have more made up.
 
fivetodrive

fivetodrive

CRISPY
Re: NEEDED! 4L80 to t-case input shaft

This might be your best bet...

http://www.transmissioncenter.net/4l80e.htm

#10A. Swap your 4L60E transmission to the much stronger 4L80E transmission with our new double strength case hardened output shaft and adapter kit. You can use the computer you have now on 1998 up models with the use of our #10X wiring harness. The transfer case you have now can be used as is and will be moved 1 3/4 to 3 1/2 inches to the rear. (WILL NOT FIT A 5 BOLT TRANSFER CASE) Cost $484.00
 
JSM

JSM

Active member
Re: NEEDED! 4L80 to t-case input shaft

Hassles > Effort Chances are very very low.

Add in lets say we build 20 shafts @ $400 each. Thats ~$8k to cough up. Now if I take deposits, then people get anxious if the parts are not done ASAP. If I don't take $ ahead, well then your not sure if customer at end will actually buy it, and some shops want deposits.

Last time we have very little markup, honestly not enough as we lost $. Add in 2 shafts USPS so gladly kept as a tax, now how do I replace those?

So Hassles > reward
 
Syclone#2960

Syclone#2960

What ever it takes!!
Re: NEEDED! 4L80 to t-case input shaft

If I only had specs on the shaft I wouldnt mind doing the foot work on producing these...or maybe a loaner to show.
 
JSM

JSM

Active member
Re: NEEDED! 4L80 to t-case input shaft

Not rocket science, take stock shaft to machine shop with internal splining capability (not easy to find). Duplicate with 32 spline. Make splines a bit longer for more engagement if you want.

4X40 material hardened prior to final assembly.

Honestly I don't even have a drawing, i took them stock shaft, 32 spline output shaft and said here it is.
 
danimal95

danimal95

Member
Re: NEEDED! 4L80 to t-case input shaft

no one has a project that has turned to the wayside that they need to sell parts from?I need this very badly!!
 
Jimmy

Jimmy

Banned
Re: NEEDED! 4L80 to t-case input shaft

TwinTurboV8Ty said:
Not rocket science, take stock shaft to machine shop with internal splining capability (not easy to find). Duplicate with 32 spline. Make splines a bit longer for more engagement if you want.

4X40 material hardened prior to final assembly.

Honestly I don't even have a drawing, i took them stock shaft, 32 spline output shaft and said here it is.
Click to expand...

I can verify that Jeff isn't the sharpest tool in the shed.So probably any other person could get some made by doing what he posted right there ^^^^
 
Last edited:
Norm

Norm

Donating Member
Re: NEEDED! 4L80 to t-case input shaft

Jimmy said:
I can verify that Jeff isn't the sharpest tool in the shed.So probably any other retard could get some made by doing what he posted right there ^^^^
Click to expand...

REtard:re·tard   /rɪˈtɑrd, for 1–3, 5; ˈritɑrd for 4/ Show Spelled[ri-tahrd, for 1–3, 5; ree-tahrd for 4] Show IPA
verb (used with object)
1. to make slow; delay the development or progress of (an action, process, etc.); hinder or impede.


I sure wish people knew the meaning of the word and how much IT PISSES some PEOPLE OFF who have a handi capped child. Smarten the hell up. !!!
 
Jimmy

Jimmy

Banned
Re: NEEDED! 4L80 to t-case input shaft

Norm said:
REtard:re·tard   /rɪˈtɑrd, for 1–3, 5; ˈritɑrd for 4/ Show Spelled[ri-tahrd, for 1–3, 5; ree-tahrd for 4] Show IPA
verb (used with object)
1. to make slow; delay the development or progress of (an action, process, etc.); hinder or impede.


I sure wish people knew the meaning of the word and how much IT PISSES some PEOPLE OFF who have a handi capped child. Smarten the hell up. !!!
Click to expand...

Right on. Sorry Norm I only post drunk. No excuse. :(
 
T-Bone

T-Bone

Active member
Re: NEEDED! 4L80 to t-case input shaft

Jimmy;945946Sorry Norm I only post drunk. No excuse. :([/QUOTE said:
If you would have left the "I only post drunk" part out, it would have been a spot-on response but you added an excuse and then typed "no excuse" :dunno:

You must really be hosed.....
Click to expand...
 
Norm

Norm

Donating Member
Re: NEEDED! 4L80 to t-case input shaft

Jimmy said:
Right on. Sorry Norm I only post drunk. No excuse. :(
Click to expand...

It's all good. I just take it very hard. My uncle laughed at my son one night when he was stammering and I was very upset about it. It' s been 6 months and I still won't talk to him. Not to highjack the thread.
 
THEMADTYPH00N

THEMADTYPH00N

Active member
Re: NEEDED! 4L80 to t-case input shaft

92TYPHOON937 said:
everybody that has one is keeping them
Click to expand...

For good reason. I have one that I wont be using for awhile, and I am local. However I fear that if I let it go I would run into the same trouble Dan is having & wouldn't be able to replace it.
 
danimal95

danimal95

Member
Re: NEEDED! 4L80 to t-case input shaft

THEMADTYPH00N said:
For good reason. I have one that I wont be using for awhile, and I am local. However I fear that if I let it go I would run into the same trouble Dan is having & wouldn't be able to replace it.
Click to expand...

willing to pay good money!!!
 
Jimmy

Jimmy

Banned
Re: NEEDED! 4L80 to t-case input shaft

T-Bone said:
If you would have left the "I only post drunk" part out, it would have been a spot-on response but you added an excuse and then typed "no excuse" :dunno:

You must really be hosed.....
Click to expand...

Thank you Dr. Phil for pointing that out.

Is there anything else that I have done wrong?
 
You must log in or register to reply here.
Top