New FMIC project (update)

[jbone]

Re: New FMIC project (update)

I like your garage lots of room!! :tup:

 

[Black Knight]

Re: New FMIC project (update)

So hows it going on this project?

 

[juicehead9]

Re: New FMIC project (update)

Project is done for a few weeks now sorry to leave you guys hanging on this one will post picture soon.

 

[BacDoc]

Re: New FMIC project (update)

Project is done for a few weeks now sorry to leave you guys hanging on this one will post picture soon.

:rant:

 

[Flyin Ryan]

Re: New FMIC project (update)

so hows this ic working out for you?? have you monitored your MATs to see if it's made any noticable difference in cooling? any additional lag? etc..

 

[juicehead9]

Re: New FMIC project (update)

OK here are the pictures of the IC project that is all done. So far so good had a few problems with the ruber L going into the T body poping off but fixed that by tightening that sucker down tight! Boosting at around 19 psi. but have not really got into it yet. No DM files as of yet. Let me know what you guys think?

 

[4C FED]

Re: New FMIC project (update)

If you'd like to a sturdier support for your hood, I made a very simple, mimimal support rod from 3/8" mild steel tubing.
I bent it in between the branches of a tree 'till I got the right shape, smashed the ends flat with a sledge hammer & drilled to holes. It uses the existing mounting holes in the core support & latch.

http://new.photos.yahoo.com/rbippus@sbcglobal.net/album/576460762353444198

 

[scrape]

Re: New FMIC project (update)

If you'd like to a sturdier support for your hood, I made a very simple, mimimal support rod from 3/8" mild steel tubing.
I bent it in between the branches of a tree 'till I got the right shape, smashed the ends flat with a sledge hammer & drilled to holes. It uses the existing mounting holes in the core support & latch.

http://new.photos.yahoo.com/rbippus@sbcglobal.net/album/576460762353444198

man thats ghetto, but hell it works. thats the kinda engineering degree i have. :rotf: :rotf: seriously though it looks good.

 

[Flyin Ryan]

Re: New FMIC project (update)

If you'd like to a sturdier support for your hood, I made a very simple, mimimal support rod from 3/8" mild steel tubing.
I bent it in between the branches of a tree 'till I got the right shape, smashed the ends flat with a sledge hammer & drilled to holes. It uses the existing mounting holes in the core support & latch.

http://new.photos.yahoo.com/rbippus@sbcglobal.net/album/576460762353444198

That looks really good and is a simple but good idea.. I've deleted my ac so my ic core fits behind the grill without the need to cut the support so I won't be doing this but for someone that has cut there support this is a good idea

 

[juicehead9]

Re: New FMIC project (update)

OK finaly have some Data Master run logs but can not host them if someone could host them and you guys check them out and let me know what you think that would be good.

 

[juicehead9]

Re: New FMIC project (update)

O one mor thing ....... dang this thing is fast, more so now then before the A2A!