new set up

James Thomas

"NO CLASS"
Re: new set up

Hey Raist, I have a PT 67BB and my set up is for 2800 stall. Does the PT 72 or 74 require that much more as far as the converter? I been thinking about going to a 72 / 74 but I don't want to go much past 3000 stall since I drive it on the street a lot. You had a 72 and now a 74, whats your opinion?

Thanks!

_________________
James
 

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
Re: new set up

3k is what i have and with bob tunning i have intanst boost no lag. as long as it is tunned right, converter does not play as much as a part in turbo size as fuel and timing does. i had a 61 with 3200 stall before on my truck and it was so laggy but that was when the tune was off pulled fuel out and it was much much better. all in the tune.
 

ViciousV6

400HP/550FTLB
Re: new set up

Raist103 said:
have been sick for the last 2 weeks, really bad the last 2 days but i got a couple pics of the new setup i will get better ones today if there is not to much snow out back.

upgraded the turbo from a 72 to a 74 thanks erue went from a rpm a/a to a mpe front mount 4" core 3" alm polish pipes, razor julio alkey control duel nozzel kit "not yet installed", mpe ss headers with a huge 2 1/2" crossover "best welds i have ever seen looks like a work of art." and had to do braided oil lines to the remote filter since they sat on the crossover. might be a couple more secerts done to but can not tell yet since i have a couple races lined up :) plan is if i get better and install the alkey is to go to the dyno monday get some new tunning done and go with more then stock timing and 14psi more like 18-26psi and bump up the timing as needed maybe 4-5'. looking up up my rwhp numbers by 120-175 or so which i think should be possible. all still on pump gas 93. goal is 10 sec street ty on pump gas and if i want to go all out and break some stuff with c-16 and a great tune hit a 9. since i have the worest luck ever i will just shot for keeping the truck together for a bit.
NewTYSetUp.jpg

NewTYSetUp1.jpg

NewTYSetUp2.jpg

NewTYSetUp3.jpg


Damn it! Someone Copied my set-up! Now i wonder how this might of happened!
Wicked Tire spin, Wicked over boosting, Wicked i might get beat by a smaller turbo truck. When is it coming down to Toms River for a cruise. I wanna ride in a fast truck!
Pic648.jpg

Pic598.jpg

Pic574.jpg

Pic572.jpg


Front Coilovers are waiting to go in and just gotta do the downpipe and wastegate and she will be ready for racing.
 

ViciousV6

400HP/550FTLB
Re: new set up

Better buy some of that velcro Heat wrap from summit so you can keep that heat off the intake pipe.
 

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
Re: new set up

after i get some tunning in i will bring it down i am planning on monday but dont know if i can get new wires before monday am and alkey install. i have to get some heat wrap for the lower rad hose as well.
 
Top