Post your build specs

K

KYTY

Donating Member
I am building a new engine and I thought it would be helpful to have one thread for build specs or formulas of what others have done and there results. Please include block details, cam specs, valve train details, turbo specs and type of tune code 59, turbo tweak etc and misc tuning aides wide band, three bar, etc. If you have dyno or track times that would be helpful also.
Something similar to what tooky did.
Thanks
Jim
 
sytyguy

sytyguy

Moderated User
Re: Post your build specs

No numbers on current (autox) build but here was my last build:

- Stock block, crank, and rods
- 412 cam
- L35s - unported with 2.02/1.60 valves
- 60# injectors
- 60-1 PTE turbo kit with 3" DP (no exhaust)
- 3k stall 9/11 converter
- Walbro, AFPR, etc...
- Large upper IC with Dequick lower CCHE & Johnson pump
- Coilovers, A/C Delete, ABS Delete and much more to drop weight
- Truck weighed 3180 with 1/4 tank of gas and no one in it

Best 1/8 mile time - 7.35 @ 95.86
Best 1/4 mile time - 11.87 @ 116.34

The best 1/4 mile time was the year before the best 1/8 mile time. Never did run the 1/4 after tuning and raising the boost when I ran the 1/8th best.
 
K

KYTY

Donating Member
Re: Post your build specs

Black Knight said:
Yep, I still have a copy saved somewhere. I'm guessing this was Jeff, Paul, or Scott.
Click to expand...

I am not sure who it was originally. I have never seen it in any of my searches but it is a sticky in engine forum. Very useful to newbies like myself,
 
SYCLONE#1531

SYCLONE#1531

'MOFOFAST
Re: Post your build specs

Stock cam
Stock heads / all stock internals....
60lb injectors
61mm turbo
Fmic
Rpm down pipe
Rpm multi chip / 26 to 28lbs boost and 26/28 timing.
3300 convertor locked..
11.40s 117
7.20s 1/8th 99mph
1.75 60fts?
 
randy merritt

randy merritt

Donating Member
Re: Post your build specs

SYCLONE#1531 said:
Stock cam
Stock heads / all stock internals....
60lb injectors
61mm turbo
Fmic
Rpm down pipe
Rpm multi chip / 26 to 28lbs boost and 26/28 timing.
3300 convertor locked..
11.40s 117
7.20s 1/8th 99mph
1.75 60fts?
Click to expand...
what is your fuel on that motor/run? Pump or e85? That is a lot of timing.
 
Logan

Logan

Member
Re: Post your build specs

Current build is stock except for pistons.
New build is:
TRW .030 pistons
Eagle Rods
Nitrided Stock crank
Vortec Heads (140 casting), still debating on porting.
Custom Cam, specs TBD
Garrett 60-1 turbo
2600 stall
Meth
60 Lb injectors
Hoping for high 11's
 
You must log in or register to reply here.
Top